Atmel ZIGBIT ATZB-RF-212B-0-CN, Datasheet

Page: 1 / 22

ZIGBIT 900 MHZ WIRELESS MODULES
ATZB-RF-212B-0-CN
DATASHEET
Features

Ultra Compact size (30.0 x 20.0 mm)

MCU less Tranceiver module with SPI interface

High RX sensitivity (-103 dBm)

Outperforming link budget (up to +112 dB)

Up to +9.0 dBm output power

Very low power consumption:

8.7 mA in RX mode
(1)

27 mA in TX mode
(1)

0.7 µA in sleep mode
(2)

Internal Clock Output

Preassigned Atmel
®
MAC address that can be used on end product

Capability to use MAC address into the onboard EEPROM

IEEE
®
802.15.4 compliant Transceiver

900MHz ISM band

Rapid design-in with built-in Chip Antenna

RF Test point using MS-147 RF connector

Small physical footprint and low profile for optimum fit in very small application
boards

Mesh networking capability

Easy-to-use low cost development kit

Single source of support for HW and SW

Worldwide license-free operation
Note:
1. MCU is in active state with 3V Supply, CPU clock @ 16MHz, RX RPC enabled (for RX current),
PHY_TX_PWR=0x0 (for TX current), All digital outputs pulled high.
Note:
2. Controller Sleep Mode
– SLEEP_MODE_PWR_DOWN