background image

1

3

5

4

The shredder runs in "Rev" mode but not in "Auto" mode.
a) 

While in "Auto" mode, the motor will not start running until paper is inserted into the 

    

feed slot. 

Set the unit to "Auto" and insert paper to be shredded. It is normal for the motor to run for  

    a moment after setting it to "Auto" but it should stop until paper is inserted. The trigger that activates the 
    shredder in Auto mode is located directly in the center of the slot. If the paper you are inserting is narrow, 
    it may not be hitting the switch. It is possible that the trigger, which activates the shredder, has become 
    blocked with paper. Insert an index card, directly in the center of the feed slot, and apply force. This 
    will usually clear any paper blocking the switch and force the switch closed.

How to clear a paper jam in the shredder:

a) Switch the shredder over into reverse mode. While in reverse, the shredder will back up to loosen the 
    jammed paper. If required, you may need to tug on the paper to effectively clear the machine. When 
    jammed paper is loosened or removed, switch back to the Auto-On mode to continue shredding.
b) With stubborn situations where the reverse function does not help, you may loosen the jammed paper 
    with shredder oil (cooking oil is acceptable, 

nothing aerosol

). Start by drizzling oil into the blades 

    where the paper is jammed. Let it soak for about 30 minutes to completely saturate. Return the 
    shredder back to Auto-On mode. If required, a rigid sheet of cardstock (old greeting card, folded file 
    folder, or a sheet torn from a cereal box) can be fed into the shredder to help push the jammed 
    paper through. 

LIMITED PRODUCT WARRANTY:

Swinton Avenue Trading, Inc.

 Limited Product Warranty

This limited warranty covers the original purchase of new product used for normal commercial, personal 
or household use. Swinton Avenue Trading, Inc. (SAT) warrants its products will be free from defects in 
materials and workmanship (normal wear and tear excepted), for one (1) year from the date of 
purchase, except as provided below. SAT, at its option, will replace with a comparable product, free of 
charge, any product which fails under normal use as a result of such defect. This warranty does not 
apply to damage caused by fire, accident, negligence, misuse, improper cleaning or other 
circumstances not directly attributable to manufacturing defects. 

Additionally, the cutting cylinders are warranted for a period of 5 years from the original purchase date 
and will be replaced without charge for material or labor if found by SAT to be defective.

Proof of purchase is required in the form of a receipt (copy or original) to validate warranty. If you do 
not have a copy of your store receipt and paid using a check or a major credit card, a copy can be 
obtained from Office Depot’s receipt retrieval department at 

1-800-721-6592. 

 

If SAT chooses to provide a refund for such product, it will be fulfilled in the form of an Office Depot 
Merchandise card. Claims fulfilled in this manner take approximately 90 days to process. 

SAT PROVIDES THIS LIMITED WARRANTY IN LIEU OF ALL OTHER WARRANTIES EITHER EXPRESS OR 
IMPLIED. EXPRESSLY EXCLUDED ARE ALL WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR 
MERCHANTABILITY. SAT’S SOLE OBLIGATION AND THE USER’S EXCLUSIVE REMEDY UNDER THIS 
WARRANTY SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT AT SAT’S SOLE DISCRETION AND 
COST, OF PRODUCT OR COMPONENTS.

IN NO EVENT SHALL SAT, ITS AFFILIATES, SUBSIDIARIES OR PARENT COMPANIES BE RESPONSIBLE 
FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES ARISING OUT OF A CLAIM OF 
DEFECTIVE PRODUCT EVEN IF SAT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

SOME STATES OR PROVINCES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR 
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION 
OF INCIDENTIAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS MAY NOT APPLY 
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE 
OTHER RIGHTS WHICH MAY VARY BY STATE OR PROVINCE.

THIS WARRANTY APPLIES ONLY TO THE U.S. AND CANADA.

Return Instructions

Please call 1-877-777-HELP (1-877-777-4357) for warranty service or product support.

TROUBLESHOOTING PAPER SHREDDERS:

The shredder does not work at all.  

a) Make sure the unit is plugged in and that the outlet it is plugged into is in good working order.

b) In the event that the shredder is run continuously for too long and the motor overheats, a thermal 
    overload switch will automatically shut the power off. If this happens, move the switch to the off 
    position for 30 minutes or more before continuing.

c) If using a plastic bag to line the wastebasket, please remove it since this may be the cause of the 
    shredder to not operate properly.
d) The activation switch of the shredder is located near the center of the feed slot. Be sure to feed directly 
    into the center area to trigger the machine (especially applies to smaller pieces of paper or 
    credit cards).
e) Make sure the head unit portion of the shredder is 
    correctly seated onto the included wastebasket with the 
    words and icons facing towards you. The head unit is 
    particularly designed to work only with the integrated 
    wastebasket. Shredders are equipped with a safety 
    interlock mechanism, which prevents the unit from 
    working when the head unit is lifted, removed, or 
    accidentally knocked over. Located on either the back 
    center, next to the power cord, is a “curved flap-like shape” that 

MUST FIT OVER THE OUTSIDE

 

    matching ridge of the wastebasket. The shredder will not operate unless the head unit is properly 
    mounted as pictured.

2

6

RISK OF FIRE. 

Never use any petroleum based or flammable oils or lubricants in or around the 

  machine as some oils can combust causing serious injury.
- NEVER dispose of flammable chemicals or materials that have come into contact
  with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket.

Never shred plastic (except credit cards), any hard materials, continuous forms, 

  

newsprint, or anything with adhesives including labels and envelopes.

- A socket-outlet should be near the equipment and be easily accessible.
- Always turn the shredder off and unplug the power cord from the AC outlet before cleaning it, 
  moving it, or emptying the waste basket.
- Never let the wastebasket become full. This will lead to shredded material being pulled back up into 
  the shredder and cause jams.
- Never place the shredder near water or any heat source.
- Keep wastebasket emptied so that the shredder output is not impeded. 
- Do not use the shredder if the power cord is damaged in any way.
- Do not attempt to service this product yourself as doing so may expose you to sharp cutting blades 
  and/or electricity and will void the manufacturers warranty.
- Never try to clean or clear the shredder blade. 

Avoid touching the document 
feed opening with hands.

Do not spray or keep any aerosol 
products in or around shredder.

Do not insert foreign objects into 
the document feed opening.

Product is not intended for use by 
children (product is not a toy).

Avoid getting hair near the 
document feed opening.

Avoid loose clothing or jewelry 
touching the document feed opening.

WARNING:

!

INSTALLATION:

Mount the shredder securely to the rim of the waste basket. (FIGURE 1)
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.

It is not designed to operate with any other wastebaskets. An activation switch located on the head unit 
automatically shuts off the shredder when it is lifted or removed. The supplied wastebasket activates this 
switch, which allows the shredder to be operable. Lining the wastebasket with a plastic bag will interfere 
and may keep the shredder from functioning.

Caution:

 Crosscut shredders have very sharp exposed blades on the underside. 

               Use care when mounting the shredder on the wastebasket.

ATTENTION:

This model includes a built-in safety interlock mechanism, which requires the shredder to be correctly 
mounted on to the included wastebasket. Located on the back center of the shredder, next to the power 
cord, there is a curved flap-like shape that must 

FIT OVER THE OUTSIDE

 matching ridge of the 

wastebasket. (FIGURE #1) 

THE SHREDDER WILL NOT OPERATE UNLESS IT IS PROPERLY 

MOUNTED AS PICTURED!

FIGURE 1

*

 ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER

    Heavier paper, humidity or other than rate voltage may reduce capacity.

Operating Instructions

Installation
Operation
Warning
Troubleshooting 
Maintenance
Limited Product Warranty

Sheet Capacity

6 sheets

20lb. bond paper*

Paper Shred Size

0.22 in. x 1.84 in. pieces

5.6 mm x 46.8 mm pieces

Credit Card Capacity

1 at a time

Voltage

Paper Entry Width

8.66 in. / 220 mm

120V~60Hz  2.0A

OPERATION:

FIGURE 2

Auto: 

This setting allows the shredder to be automatically started by inserting paper into the 

          shred opening. Always feed the paper in as straight as possible. When the paper has 
          passed through, the shredder will automatically stop. (FIGURE 2)

Off:   

This setting turns off all features of the shredder. For safety reasons, we recommend that 

         you leave the shredder in the "Off" position whenever the shredder is unattended or 
          not in use. (FIGURE 2)

Rev:  

In the unlikely event of a paper jam, the reverse setting can be used to help clear the

         cutters of paper that has not passed through. Never attempt to clear a jam by using 
         the reverse function until you have emptied the wastebasket. (FIGURE 2)

I

R

O

Never shred plastic (except credit cards), any hard materials, continuous forms, 
newsprint, or anything with adhesives including labels and envelopes. 

While this shredder will shred staples, it is recommended that you remove them whenever possible in
order to extend the life of your shredder.

Only shred credit cards by feeding them vertically within the designated area.
Never feed more than one credit card at a time.

Using the switch located on the unit, select one of the following settings by sliding the switch either 
left or right. (FIGURE 2)

MAINTENANCE:

Keep your shredder running with ultimate reliability with the following Ativa shredder supplies:

Shredder Lubricant Sheets

To quickly and conveniently maintain shredder blade lubrication, use a Shredder Lubricant Sheet once 
a month.

Shredder Oil

Apply a bead of this lubricant across a sheet of paper once a month and shred it. It helps to keep the 
shredder blades operating well over many years of use.

CLEANING:

• ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!
• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.
• Do not clean or immerse shredder in water. Having the unit wet may result in 

   damage or malfunction to the electrical components. If the shredder happens to get 

   wet, be sure to completely dry the unit immediately with a cloth or towel.

• Never use anything flammable to clean the shredder. 

   This may result in serious injury or damage to the product.

Oil the shredder blades every month with recommended lubricant sheets (Office Depot item number 
340-960) or oil (Office Depot item number 285-661).

Do not spray or keep any aerosol products in or around shredder.
DO NOT USE CANNED AIR ON SHREDDER.

Reviews: