1
Housing
Dimensions
96 x 48 x 88 mm
Display
Single Line , 6 Digits 14mm LED Display ( RED color )
Display Range
-99999….999999
Weight
300 gram
Box
Suitable for flush-panel mounting
Relative Humidity
80% up to 31°C decreasing linearly 50% at 40°C.
Operating Temperature
0...50 ° C
Storage Temperature
-10...60 ° C
Protection Class
IP 60 front panel, IP 20 rear panel
Electrical Characteristics
Power Supply
24V AC/DC 50/60 Hz.or 85-265 VAC 50/60 Hz.
Power Consumption
Max. 5,5VA - 4.4 W
Connections
2,5 mm² screw-terminals connection
Inputs
Counting Frequency
600 KHz (Quadrature mode)
Input Channels
A, B counting inputs; Z external reset input; external HOLD input
Z (Reset Input)
Selectable in Rise or Fall edge triggering (From software)
HOLD Input
Selectable in Rise or Fall edge triggering (From software)
Polarity Input
Programmable, npn or pnp for all inputs
Outputs
Control Ouutput
4 Relay: 250 VAC, 3 A (for Resistive load) COM, NO and NC
Sensor Supply Output
5 VDC or 12 VDC, 100 mA
Digital Out
RS-232 Serial Interface
WARNINGS
94x48 mm dimensions
600 KHz reading speed
6 digit display
Functional External Z input
Functional HOLD input
Quadrature mode up – down counting
2 or 4 couple contact relay output
Set-1 can be set related with Set 2
Optional factor value (between 0,00001 and 999999)
Optional decimal point between 1. and 5. digits
5 VDC or 12 VDC encoder power supply
11 various output control mode
OFFSET value is adjustable
Password Protection
1. Fallow the instructions and read the manuel before conection and using the device.
2. Check the power supply type before giving energy.
3. Mount the device to the panel robustly againts to the drops, vibration and shakings during utilization.
4. Make the sensor connections while the energy off. Never change the connections while the energy is on.
5. Keep Away from the high voltage.
6. Don’t expose to the sunbeams and heating source directly in the utilization place.
7. ALC94 Industrial Control Device proper only for room conditions, don’t use outer environment.
8. Clean the device only with a moist duster, never use water, thinner ect...
9. Adapt the relays to the given technical relay output values.
10. There is no part for replacing or repairing, please call the service in case a defect.
HIGH SPEED UP / DOWN COUNTER
ALC94
