ATD Tools SABER ATD-80133, Instructions

Page: 1 / 3

ATD-80133 Instructions
Features and Specifications
• 7.4V 1400MAh Li-ion rechargeable battery - twice the life expectancy compared to regular rechargeable batteries.
•
Cordless, 30 super bright LED’s provide long, dependable service life.
• Shatterproof and shock resistant protective tube.
• Swivel hooks make this light easy to attach anywhere - horizontally or vertically.
• The ATD-80133 Saber Li-Ion Worklight provides an average runtime of 6 hours per charge.
• 9V 500mA AC to DC adaptor can be used with110VAC power source.
• OPTIONAL DC adaptor (ATD-80131) can be used with your vehicles 12V power outlet.
• Red light on adaptor (indicates charging), green light on adaptor (indicated fully charged), blue light on led board
(indicates low battery).
• Overcharge and over discharge protection.
• Automatically shuts off soon after low battery indicator lights up.
Charging Instructions
The battery is only 50% charged before shipping. Fully charge your ATD Saber Worklight before use.
Be sure your ATD Saber Li-Ion Worklight is turned off, as it will not charge while in use, and then plug the AC charging
unit into the wall and into the bottom of your ATD Saber Li-Ion Worklight. The LED indicator on the wall charging unit
will change from red to green when the ATD Saber Li-Ion Worklight
is fully charged.
The blue indicator light on the LED board will come on when the battery is almost discharged, giving you a few minutes
of light left before the light goes completely out. It will not fade out, it will simply turn off.
The ATD Saber Li-Ion Worklight will need to be recharged when the blue indicator light on the LED board comes on.
Charging time for a full charge is approx 3 hours. Be sure to only use the AC adaptor (supplied) or the DC adaptor
(optional) with the light. Use of any other 110VAC or 12VDC adaptor can cause battery damage.
The ATD Saber Li-Ion Worklight needs to be fully charged at least every 6 months to maintain the performance of
battery.
Operating Environment
• The ambient temperature range for working is 14°F-122°F (-10°C-50°C).The ambient temperature range for
charging is 32°F-104°F ( 0°C-40°C). Charging the battery at a lower or higher temperature range will damage the
battery.
• Keep your ATD Saber Li-Ion Worklight away from heat sources.
• Keep your ATD Saber Li-Ion Worklight away from acids and alkalines.
• Avoid bumping or dropping your ATD Saber Li-Ion Worklight
U.S. Patent Number D548,382