![background image](http://html1.mh-extra.com/html/atd-tools/rhino-tools-rho-9002/rhino-tools-rho-9002_instructions_2996758001.webp)
RHO-9002
RECHARGEABLE 2 MILLION CANDLE POWER HALOGEN
SPOTLIGHT
OPERATION
-Charge the battery prior to initial use. (See Charging Instructions)
-Turn the unit ON and OFF using the switch on the main body.
CHARGING INSTRUCTIONS
AC/DC Charger
-Description: AC-DC Adaptor Charger.
Input: AC 110~120V 60Hz, Output: 9V DC 300mA
-Insert the charger plug into the DC jack of the unit and plug the charger into any
110-120VAC supply. Charge the unit for 20 hours before the first use. For subsequent
charges, allow approximately 10-12 hours.
12V DC CAR Plug Charger
Plug the car plug adaptor supplied into the cigarette lighter socket on your car (truck or
boat), and insert the adaptor plug into the DC jack of the unit. The time required to fully
charge the battery from the 12VDC power supply is around 16 hours.
IMPORTANT NOTE
-Only use the charger supplied by the manufacturer. Other chargers may damage the unit
and will void the warranty.
-It is not recommended to use the unit continuously. It is designed for intermittent use only.
-Do not overcharge the battery. The battery service life will be shortened.
-Charge the battery immediately after each use. Do not store the discharged battery for
long periods, as this will also shorten its service life.
CAUTION
-Do not touch the lens during operation. It will be extremely hot.
-Do not cover the lens and reflector during operation.
-Do not point the spotlight directly into the eyes.
-When the Spotlight is ON, do not point the lens downward or toward surface anytime. It
will burn most surfaces.