Telephone base and charger installation
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your user’s manual
provided in the package, or see the online user’s manual at
www.telephones.att.com/manuals.
Battery installation
Install the battery as shown below. Charge your handset(s) before initial use.
The battery is fully charged after 16 hours of continuous charging.
Quick start guide
TL92271/TL92321/TL92371/TL92421/TL92471
Use only the supplied rechargeable battery or replacement battery (model BT166342).
Caution:
Use only the power adapter provided with this product. To obtain a replacement, visit
our website at
www.telephones.att.com
or call
1 (800) 222-3111
. In
Canada, dial
1 (866) 288-4268
.
Quick reference guide - handset
Step 1
Plug the battery connector
securely into the socket
inside the handset battery
compartment. Insert the
supplied battery with the
label
THIS SIDE UP
facing
up as indicated.
Step 2
Align the cover flat
against the battery
compartment, then
slide it upwards until it
clicks into place.
Step 3
Charge the handset by placing it face forward in
the telephone base or charger. The
CHARGE
light
on the top of the handset is on during charging.
CHARGE
light
PUSH TO TALK
Press to display the PTT menu to begin a
PTT call.
Press and hold to begin a one-to-group
broadcast when the handset is not in use.
•
•
Initial settings
We recommend you program your telephone system before use.
The following are a few examples of common features to set before using the
telephone. Refer to the
Handset settings
and
Answering system settings
in the
user’s manual for detailed instructions on setting all telephone features.
Set date/time
Set the date/time before using the answering system.
Using a cordless handset:
1.
MENU
->
q
or
p
->
Set date/time
->
SELECT
.
2.
Enter the month, day and year using the dialing keys
->
SET
.
3.
Enter the hour and minute using the dialing keys.
4.
q
or
p
to choose
AM
or
PM
->
SET
.
Record your own announcement
Your outgoing announcement plays when calls are answered by the answering
system. You can use the preset announcement to answer calls, or replace it
with your own recorded announcement.
Using a cordless handset:
1.
MENU
->
q
or
p
->
Answering sys
->
SELECT
.
2.
SELECT
to select
Announcement
->
RECORD
.
3. Facing the handset, record your announcement and press
STOP
to
end recording.
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5
or 6 rings, or toll saver. If you choose toll saver, the answering system answers
a call after two rings if you have new messages, or after four rings when there
are no new messages.
If you want the built-in answering system instead of the voicemail to answer a
call, you should set the answering system to answer a call at least two rings
before the voicemail is set to answer. Contact your telephone service provider
for information on your voicemail settings.
Using a cordless handset:
1.
MENU
->
q
or
p
->
Answering sys
->
SELECT
.
2.
q
or
p
->
Ans sys setup
->
SELECT
.
3.
q
or
p
->
# of rings
->
SELECT
.
4.
q
or
p
to choose among
6, 5, 4, 3, 2
or
Toll saver
->
SET
.
Ringer volume
You can set the ringer volume level to one of the six levels or turn the
ringer off.
Using a cordless handset:
1.
MENU
->
q
or
p
->
Ringers
->
SELECT
.
2.
SELECT
to select
Ringer volume
.
3.
q
or
p
->
All lines
,
Home
,
Cell-D1
or
Cell-D2
->
SELECT
.
4.
q
or
p
to choose the desired level ->
SET
.
Quick reference guide - telephone base
Softkeys (2)
Show the menu.
Select an item or save an entry
or setting.
CHARGE light
On when the handset is
charging.
CELLULAR
Make or answer a cell call.
Answer a call waiting call
during a cell call.
HOME/FLASH
Make or answer a home call.
Answer a call waiting call
during a home call.
1
Press repeatedly to add or
remove
1
in front of the call
log entry before dialing or
saving it to the directory.
TONE
Switch to tone dialing
temporarily during a call if you
have pulse service.
Toggle the name order when
saving a caller ID log entry into
directory.
/SPEAKER
Make or answer a home or cell
call using the speakerphone.
Switch between the
speakerphone and the handset.
REDIAL/PAUSE
Press repeatedly to view the
last 10 numbers dialed.
Press and hold to insert a
dialing pause while entering
numbers.
EQ
During an outside call,
intercom call, message or
announcement playback, press
to change the quality of the
audio to best suit your hearing.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DIR /VOLUME
Scroll up in menus.
Increase listening volume when
on a call or message playback.
Show directory entries.
Move the cursor to the left
while entering names or
numbers.
MUTE/DELETE
Mute the microphone during
a call.
Delete digits while predialing.
Delete an individual entry
while reviewing the redial list,
directory or caller ID history.
Erase a digit or character while
entering or editing a directory
entry.
Silence the ringer temporarily.
Delete a message or
announcement during message
or announcement playback.
OFF/CANCEL
Cancel an operation, back up
to the previous menu, or exit
the menu display while using
menus.
Press and hold to return to idle
mode.
Hang up a call.
Press and hold to erase all the
Missed calls
or
Download fail
messages.
Silence the ringer temporarily.
CID /VOLUME
Scroll down in menus.
Decrease listening volume
when on a call or message
playback.
Show caller ID history.
Move the cursor to the right
while entering names or
numbers in the directory.
# (pound key)
Press repeatedly to display
other dialing options when
reviewing a caller ID history
entry.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A DSL filter (not included)
is required if you have
DSL high-speed Internet
service.
The DSL filter must
be plugged into the
telephone wall jack.
Route the telephone line
cord through this slot.
Route the power
adapter cord through
this slot.
Plug the power adapter into
a power outlet not controlled
by a wall switch.
Plug one end of the
telephone line cord into
a telephone wall jack.
Raise the
antenna.
Plug the power cord and
the telephone line cord into
the jacks.
Message counter
Number of messages
(or during playback,
message number
currently playing).
•
IN USE
light
On when the handset
is in use, when the
answering system is
answering an incoming
call, or when you are
registering a handset.
•
DEVICE1/DEVICE2
lights
On when the telephone
base is paired and
connected with a Bluetooth
device.
•
X/DELETE
Press to delete the
message currently
playing.
When the phone
is not in use, press
twice to delete all
previously reviewed
messages.
•
•
/REPEAT
Press to repeat a
message or press twice
to play the previous
message.
•
/ANS ON
Press to turn the
answering system on
or off.
•
/SKIP
Press to skip to the
next message.
•
/HANDSET LOCATOR
Press to page all system
handsets.
Press and hold to begin
handset deregistration.
•
•
/PLAY/STOP
Press to play
messages.
Press to stop
message playback.
•
•
VOLUME
Press to adjust the volume during
message playback.
When the phone is not in use, press
to adjust the telephone base ringer
volume.
•
•
