background image

Product Type:

Model:

3027

12V 3" MINI CORDLESS PISTOL POLISHER

W/ 2 BATTERIES 

Page 1

Study, understand and follow all instructions provided 

with this product. Read these instructions carefully 

before installing, operating, servicing or repairing this 

tool. Keep these instructions in a safe accessible place.

INTENDED USE OF THE TOOL

The 3027 3" cordless polisher is designed to rapidly

polish small areas such as bumper recesses, door sills

and headlights. Only use attachments made for use with

this tool. Do not use this tool outside of the designed

intent. Never modify the tool for any other purpose or use.

Caution: To help prevent personal injury

• Use of this product can expose you to chemicals 

including ethylene glycol, gasoline vapors and 
engine exhaust, which are known to the State of 
California to cause cancer, birth defects, or 
reproductive harm. For more information, visit 
www.P65Warnings.ca.gov. Always wear ANSI 
approved safety equipment, safety glasses and 
clothing when using this product. Study, understand, 
and follow all instructions provided with this product. 
Failure to read and follow all warnings and operating 
instructions may result in damages and serious 
injury or death.

• Always wear ANSI approved goggles when using 

this 

product. (Users and By standers).

• Never use this tool for any application other than for 

which it was designed. 

• Only use accessories designed for this tool. 
• Never alter or modify this tool in any way. 
• Improper operation and/or maintenance of the tool, 

modification of the tool, or use of the tool with 

accessories not designed for it could result in 

serious injury or death. 

• Always select the correct accessories of the correct 

size and design for the job that you are attempting to 

perform.  

• Always work in a clean, safe, well-lit, organized and 

adequately equipped area. 

• Do not begin repairs without assurance that vehicle 

is in secure position, and will not move during repair. 

WARNING

WARNING

www.astrotools.com

1 YEAR LIMITED WARRANTY

• Astro Pneumatic Tool Co. warrants our products to the 

original user against defective material or workmanship 

for a period of 1 year (except where noted on our price 

schedule) from the date of 1st use. Astro reserves the 

right to determine whether the product failed because of 

defective material, workmanship or other causes and to 

charge back for missing parts. Astro Pneumatic Tool 

Co., at its discretion, will repair products covered under 

this warranty free of charge. The distributor should 

direct the original user to return the product (with the 

exceptions listed below) with the distributor’s name, 

address, adequate proof of date of purchase or a copy 

of warranty card, and a short note explaining the 

problem. 

Failures caused by accident, alteration, or 

misuse are not covered by this warranty. 

• Astro Pneumatic Tool Co. or its authorized service 

representatives must perform all warranty repairs. Any 

repair to the product by unauthorized service represen

-

tatives voids this warranty. The rights under this 

warranty are limited to the original user and may not be 

transferred to subsequent owners.

• This warranty is in lieu of all other warranties, expressed 

or implied, including warranties of merchantability and 

fitness for a particular purpose. Some states do not 

allow the exclusion of limitations of incidental or conse

-

quential damages so the above limitations may not 

apply to you.

PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING

1-800-221-9705 FOR INSTRUCTIONS

PRODUCT INFORMATION

BEFORE USE

DO NOT DISCARD – GIVE TO USER

• Compact lightweight pistol style 3

" polisher with

  2-position side handle and ergonomic comfort grip 

• Includes 2 Lithium-Ion batteries, charge level indicator 

  on polisher and wall charger for minimal down time 

• High/Low power settings for 0-2800RPM/0-8300RPM

  perfect for small trim, door sills, grills, headlight 
  restoration and more 

Drive style: Spindle Thread Size - 5/16" x 24T
No-load speed: Low 0-2800/RPM (Polishing speed)

                         High 0-8300/RPM (High speed polishing or sanding)
Rechargeable battery: 12 volt/1.5 Ah Lithium-ion
Battery charger voltage rating: AC 100-240V 50-60 Hz
Charger output: [email protected]
Charge time: 3-4 hours

Specification:

When unpacking, check the parts diagram and part 

number listing on page 

to make s

ure all parts are 

included. If any parts are missing or damaged, 

please call your distributor.

Summary of Contents for 3027

Page 1: ...e material or workmanship for a period of 1 year except where noted on our price schedule from the date of 1st use Astro reserves the right to determine whether the product failed because of defective material workmanship or other causes and to charge back for missing parts Astro Pneumatic Tool Co at its discretion will repair products covered under this warranty free of charge The distributor sho...

Page 2: ... people who are not familiar with the operation of the tool Tools are dangerous in the hands of inexperienced operators 5 Make sure the tool s moving parts are not aligned or blocked that it has not broken any parts or any other condition that may affect the operation of the tool PRECAUTIONS FOR USE 1 Do not use any other charger than the one specified by the manufacturer A charger that fits to a ...

Page 3: ...cking pad NOTE Always use side handle for better control Position the side handle in the location which offers best control and guard protection WARNING Hold tool securely with both hands before starting the tool WARNING Never bang accessory onto work Too much pressure causes accessory failure or slows speed 1 Remove the battery Always remove the battery before changing or removing accessories 2 U...

Page 4: ...d spindle rotation is clockwise ONLY There is no setting for counter clockwise operation DISPLAY BATTERY STATUS ON TOOL Three color LEDs 11 indicate the battery status whenever the ON OFF button is pressed All LEDs are lighted The battery is fully charged Yellow and red LEDs lighted The battery has sufficient charge to operate at full power Red LED lighted the battery has less than 30 charge and n...

Reviews: