1600VP
Continuously-variable Pattern Condenser Hanging Microphone System with Remote Polar
Control and Exclusive Anti-rotational Positioning Mount
Description
The 1600VP is a continuously-variable pattern condenser hanging microphone
system with remote polar control and anti-rotational positioning mount. The
variable polar pattern with remote control allows the user to precisely adjust
the shape of the pick-up pattern for best performance from a remote location.
Utilizing a two-conductor shielded cable (max length 2,000 feet) between the
microphone head and the pattern-control box, the user can adjust the polar
pattern in real time without changing capsules, microphone positions, or
inducing noise in the audio chain.
Special attention has been given to the frequency response and sensitivity of
the microphone while utilizing the variable-pattern control to precisely alter the
shape of the pick-up pattern. The large-diameter, low-noise elements produce
a frequency response of 40Hz to 20KHz with a selectable, recessed 80Hz,
12dB/octave high-pass filter that removes unwanted low-frequency energy
when engaged. The filter control is conveniently located on the control box.
The microphone head is made of commercial grade aluminum, the control box
is made of hardened steel, both are powder coated and made in the USA. The
microphone head is painted matte black for an unobtrusive yet stylish appear-
ance. The remote polar-pattern control box can be mounted in a single rack unit shelf with optional accessories.
Up to six control boxes can be mounted in one rack unit - Astatic RU1. The polar-pattern dial is positioned for easy
adjustment ”on the fly” and can be secured with a single “Flat Style” blank panel when rack mounted.
The 1600VP has been designed to resist interference from devices such as cell phones, two-way communication
devices and lighting apparatus. Utilizing our RF Resistant Architecture, the 1600VP meets the stringent RF standards
set by the European Union (see the specification section for more information).
The 1600VP comes complete with 30' (9.1m) of two-conductor shielded cable terminated with a TA3F-type connector
and 3-pin XLRM-type connector. Also included with the microphone system is a 3-pin XLRF-type connector on a stain-
less steel duplex wall plate, exclusive articulating steel hanger, and anti-twist thread and rods.
The 1600VP is primarily designed for recording and sound reinforcement of choirs, instruments and ambient miking.
The 1600VP can also be used for vocal pick-up in government, institutional and business applications. The 1600VP is
designed to be suspended from a ceiling. The optional miniature-boom (MB-1), allows the microphone system to be
used on a free-standing microphone post.
The 1600VP microphone system is designed to shorten the list of products an audio designer needs to consider when
hanging microphones are specified. The remote variable polar pattern control allows the installer or end user the ability
to change polar patterns when installed or from scene to scene. Adjustments to the pick-up pattern can be done ”on
the fly“ without costly lifts, ladders and capsules. Choose the 1600VP for your next overhead microphone install.
Features
• Continuously-variable polar pattern controllable from a remote location
• Remote box is rack mountable, up to six units per shelf
• Blue LED status indicator on remote box
• Selectable recessed high-pass filter for elimination of unwanted low-frequency energy
• Securable controls with standard flat style blank rack panel, when rack mounted
• RF (radio frequency) Resistant Architecture
• Included 30’ (9.1m) cable, wall plate, articulating steel hanger and all accessories for hanging the microphone
Astatic Commercial Audio Products
6573 Cochran Rd. Building
I
Solon, Ohio 44139 U.S.A.
Tel: (440) 349-4900 Fax: (440) 248-4902 Sales: (800) 421-3161
www.astaticinstalled.com
©2009 Astatic Commercial Audio Products
Part No. 46873-92-00 Apr2009
Two-Year Limited Warranty
Astatic Commercial Audio Products hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely
event that a defect occurs Astatic will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with
any warranty claim.
This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to Astatic’s instructions or unauthorized repair. All implied warranties,
merchantability, or fitness for a particular purpose is hereby disclaimed and Astatic hereby disclaims liability for incidental, special or consequential damages resulting from the use or
unavailability of this product.
This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.
Note: No other warranty, written or oral is authorized by Astatic Commercial Audio Products.
Shipping Instructions
Please call our customer service department at 440-349-4900 for a pre-approved return authorization number.
Carefully repack the unit and return the insured package to: Astatic Commercial Audio Products, 6573 Cochran Road, Building
I
, Solon, Ohio 44139.
RETURNS WITHOUT A
PRE-APPROVED RETURN AUTHORIZATION NUMBER WILL BE REFUSED.
If outside the United States, contact your local dealer or distributor for warranty details.
4 of 4
1 of 4
Using the Wall Plate
1.
Attach the upper-support arm
to the wall plate.
2.
Run provided thread to
counterbalance support
(small loop on support).
3.
The microphone head can be
twisted in the hanger to help
correct for rotation if the
thread is not used.
Using the Articulating Steel Hanger
1.
Insert the microphone head into the large
hoop of the hanger.
2.
Line up the microphone head screw hole
and insert security screw.
3.
Run the provided cable through the hanging
hoop (small hoop).
4.
Wrap the cable around the underside of the
pivot joint.
5.
Adjust microphone angle and tighten
thumb screw.
