![background image](http://html1.mh-extra.com/html/aspire/ce6/ce6_instructions_2985328001.webp)
www.
eCigWorld
.com.au
For more guides, hints and tips; visit www.
eCigWorld
.com.au
eCigWorld
CE6 / CE5
PERSONAL VAPOURISER INSTRUCTIONS
Congratulations on your purchase of this
eCigarette Starter
kit! The following are some basic instructions on
handling, use and care of your
eCig Starter Kit
equipment.
Please read this guide completely before using
your device.
Please also ensure the batteries are fully charged before your first use. The battery is locked when
shipped (see charging and unlocking instructions below).
General
Kit contents
eGo/510 compatible Normal or Variable Voltage (either 4 click VV or VV Twist) batteries
clearomisers
AKA Tank to fill eliquid
USB charger lead with LED indicator
Australian wall plug for USB cable
depending on Kit or buy as an extra optional
eliquid
optional extra
C
arry case
How to
Filling/
R
efilling the clearomiser
CE6 / CE5 / GT are Top filling clearomiser i.e. you take out mouth piece and fill it from there. Where
as Protank, Aerotank, Nautilus etc are bottom filled clearomiser
Unscrew the clearomizer from the battery if your kit has arrived assembled. Always screw/unscrew
clearomisers from their base rather than the main body. Then unscrew the clearomiser mouthpiece.
Drip or syringe 1.6ml maximum (less if refilling as wick holds some juice even when the clearo is empty) into
the tank while holding it at an angle slightly off vertical. Do not fill past the 1.6ml mark and do not allow
liquid to enter the hole on the center post inside the clearomiser.
Once filled, screw the mouthpiece back on, being careful not to cross thread or over-tighten.
Assembly
Screw the clearomiser into the battery. Be careful not to cross thread or over-tighten.
NOTE: Over-tightening chargers, clearomizers and atomizers can damage a battery. Carefully screw on
these components until you begin to feel resistance; then apply a maximum further one-quarter turn.
General Usage