background image

PRESENTATION

The UPS is a Line interactive 
uninterruptible power system (UPS). 
When utility input is Normal, the UPS will      
charge the internal battery. If the utility 
input is abnormal, the UPS can supply AC 
power to the load immediately without 
resetting the computer.

The UPS:

1. Utilizes microprocessor based 

controls, to get assurance of 
reliability.

2. Automatic frequency selection to 

match with utility power.

3. Advanced battery management to 

prolong battery's life and fully charge 
the battery.

4. Overload & short circuit protection 

both in line and battery mode.

IND600 UPS is designed keeping in mind 
severe Indian Conditions. It has below 
unique features, which no ordinary UPS 
provides.

INDIA SPECIFIC FEATURES OF UPS

1. AVR Input Range 140V - 300V.
2. 3 output sockets.
3. OFF mode battery charging.

IND600 User Manual

Thank you for selecting ISO9001:2008 certified Uninterruptible power supply system (UPS). It provides perfect protection for your 
computers. The Manual Provides you with step by step guidance to install & use UPS. It contains important safety instructions for 
operation & correct installation of the UPS .In case you have any problem with the UPS please refer to this manual before calling 
customer service.

A.   Inspect UPS

Remove the UPS from its package and 
inspect it for damage that may have 
occurred during shipping. If any damage 
is found, re-pack the unit and return it to 
the place of purchase.

B.   Charging Battery

Charge battery for 16 hours for first time 
run.

C. Install UPS

• Do not place UPS in Direct sunlight.
• Do not place UPS near Excessive heat 

source

• Do not place UPS near Excessive 

humidity or let UPS come in contact 
with liquids.

Place the UPS atleast 20cms away from 
the monitor to avoid interference.

D.   Connect Computer to UPS

This UPS is equipped with 3 output 
sockets. Data sensitive equipment such 
as a computer, and monitor should be 
powered by battery backup sockets. 
Battery power is provided without 
restart in case of power failure.

Note : Do Not Plug a laser printer, copier, 
heaters, or other large electrical device 
into the UPS. The power demands of 
these devices will overload and possibly 
damage the UPS.

E.   Turn on / off UPS

F.   User Interface

Plug in the 3 pin power cord into 230V AC 
wall socket. Press the power switch to 
turn on   the UPS; press the power switch 
again to turn off the UPS. Do NOT press 
the switch too hard for extended life of 
the power switch.

Front Panel:

The front panel incorporates one LED 
and a switch. The 
functions of these
are listed below:

LED Status:

1. AC Mode : Green 

light steady.

2. Backup Mode : Green light blinking

Alarms:

1. Backup Mode : When in backup 

mode, the green LED blinks and the 
UPS Beeps every 2 seconds.

2. Battery low: Rapid beeping sound 

every half second.

3. Overload : Continuous beeping 

sound.

UPS

KEEPING YOUR TECHNOLOGY ALIVE

Reviews: