MATXM-CORE-411-WR
Quick Start Guide
P/N:6806800L45B (September 2014)
Observe ESD-safe
measures
What’s in the box?
Install the processor
When installing or servicing the module or
accessories, strictly observe the safety
precautions in the Safety Notes. Other-
wise, personal injury or property damage
may occur.
• Use either a properly grounded ESD wrist
strap or make sure that you are working
in an ESD-safe environment.
• Connect to the ESD connector at the
front or the rear of the system.
Make sure you receive all items of your shipment:
• One MATXM-CORE-411-WR
• One printed copy of Quick Start Guide (this
document)
• One printed Safety Notes Summary
• Motherboard
• Midplane
• CPU
• CPU cooler
• Memory module
• Cables
• IO shield
• Driver CD
• USB sticks
• Any other optional items ordered
Prepare the installa-
tion site
• For information on the environmental
and power requirements, see the
MATXM-CORE-411-B Installation and Use
manual.
• The MATXM-CORE-411-B must be in
good condition, without defects such
as oxidation, chemical corrosion, missing
components, or transportation damage.
• Confirm the position where the MATXM-
CORE-411-B will be installed.
1. Take the processor out of the antistatic pack-
age.
2. If a processor is currently installed, open the
socket actuator using a screwdriver, and
then remove the processor.
3. Check the bottom of the new processor to
make sure that there is no shortage or dam-
age of the PGA pin.
4. Align the arrow on the Pin A1 of the new pro-
cessor with the arrow on the socket, and
then close the socket actuator with a screw-
driver while gently holding the processor
down with your finger.
5. If necessary, reattach the cooling system
and reassemble the system according to the
documentation that came with your system.
1
2
3
4
