Included in delivery:
✔
1 battery pack including 3 standard AAA rechargeable
batteries
✔
1 battery charger (100-240 Volt, 50-60 Hz)
✔
1 USB radio transceiver
✔
1 USB cable extension
✔
1 hexagon key (2mm)
i
The USB radio transceiver has to be plugged into any USB port of
the ARTTRACK Controller (ATC) before the controller is switched
on. During operation, please do not unplug the USB radio
transceiver.
Switch on the ATC.
LED (2) lights continuously while ATC is booting.
When DTrack2 is started, LED (1) is switched on and indicates
that the radio transceiver was correctly initialized.
During measurement, LED (1) is flashing whenever data is
received from or transmitted to the Flystick2.
In case of unsuccessful data transmission to the Flystick2, LED
(2) starts flashing.
For more information, please refer to the user manual.
2
1
2
Mounting:
The battery compartment is at the lower end of the handle. It is
fixed by a single screw, which can be opened using the supplied
2mm hexagon key.
Insert the battery pack taking care of the polarity.
Apply the cover of the battery compartment and fix the screw
again.
!!
3
The Flystick2 is a wireless input device for usage with all ART
optical tracking systems, using passive markers under a
protecting hood and wireless transmission operating in the
2.4GHz band.
Control elements of the Flystick2:
The Flystick2 has a trigger, four buttons and an analogue
joystick with an additional button functionality. All controls of
the Flystick2 can be used simultaneously.
The Flystick2 has two LEDs to signal its state:
●
green flash … data has been transmitted successfully
●
yellow flash … data has not been transmitted successfully
●
flashing yellow periodically … indicates low battery – please
recharge soon
●
yellow permanently lit … registering phase
1
Security advice:
The rechargeable batteries may only be charged with the supplied charger.
The batteries must be removed before shipping the Flystick2, otherwise the radio transmitter could be started by shock or
vibration.
The rechargeable batteries must be inserted into the battery pack taking care of the indicated polarity.
CAUTION: Risk of explosion if battery is replaced by an incorrect type!
Dispose used batteries according to governmental regulations.
Quick-Guide
Flystick2 & DTrack2
01 / 2012
