Gyroscope
(
AT
-
EG301
)
Manual
connect
to
tail
servo
Picture of control set connection
2. Elevator
1
.
Aileron
4. Rudder
5. Gyro gain
6. Pitch
3. Throttle
1. Working Voltage : DC 4V-6V
2. Working currency: 40mA
3. Weight: 15g
4. Dimension: 31mm * 31mm * 23mm
Specification
1. Built-in lock mode and standard mode
2. Built-in temperature compensation circuit
3. Multi-gain control
adjustment
function
4. Gyroscope
normal
/
reverse
direction
switch
5. Rudders itinerary adjustment function
Feature
This gyroscope uses digital PID control method. It has a built-in temperature compensation circuit
and
thus
greatly
reduces
the
impact
of
temperature
change
on the midpoint offset
.
It
has
two working
modes
:
locked
mode
and
standard
mode
.
With
multi
-
gain
controls
and
many
adjust methods
,
this
gyro can
perform
head
-
lock
function
easily
.
It
is easy to fit different kinds of helicopters. It is a good
choice for hovering,
flying routes,
reverse flight and other stunt flying
.
Gyro adjustment
6.
Gyro signal Connect to Ch4
5.
Gyro gain Connect to Ch5
3.
Connect to tail servo
2.
Gain adjustment
1.
Rudder itinerary
adjustment
4. Reverse switch for servo
