SEAT POSITION CHART
X2-CADET / ROOKIE
NOTES:
- All dimensions refer to Kartech ‘RT’ type seats only
- All above measurements are with the rear axle in 920 centre position and chassis in high
position (axle low)
ASSEMBLY NOTES
Arrow self-aligning seat washers:
The Arrow karts are supplied with Arrows unique self-centring seat washer
system. Fitting between the chassis seat supports and seat, these washers
insure there are no torsional loads placed on the seat through mis-
matching angles between the seat and the chassis. The seat does have an
influence on the handling characteristics of the kart as it is an important
torsional member on a karts chassis structure. As such, the Arrow self-
aligning seat washers are major asset in alleviating pre-loads within the
kart. (See diagram above).
SUGGESTED STARTING SET-UP
FRONT CRASH BAR:
Loose
REAR CRASH BAR:
Tight
REAR RIDE HEIGHT:
High (axle low in kart)
REAR TRACK:
1105 (ONLY MOVE IN 5MM INCREMENTS)
REAR AXLE TYPE:
Standard
FRONT RIDE
HEIGHT:
Central
FRONT TOE:
2mm OUT Overall
FRONT TRACK:
10mm (ONLY MOVE IN 5MM INCREMENTS)
FRONT CASTER:
Central, both lines pointing back
FRONT CAMBER:
2mm POSITIVE Overall
FRONT TORSION
BAR:
Removed
SIDE POD BARS:
Loose
REAR HUB LENGTH:
50mm
ACKERMAN:
Middle, top hole on stub arm
SMALL DRIVER
28KG-130 CM TALL
MEDUIM DRIVER
35KG-138CM TALL
LARGE DRIVER
40KG-147CM TALL
A
B
C
A
B
C
A
B
C
S
E
AT
S
IZ
E
MS
100
Use
KSE15D
seat
bracket
240
95
60
215
120
N/A
N/A
N/A
‘SL
Tyre.
Eg.
Dunlop
SL1
MRC
N/A
N/A
N/A
50
215
110
40
215
105
