background image

723500617

Model No.

Owner's Manual & Assembly Instructions

 

                                                                   Exterior Dimensions                           Interior Dimensions                             Door

                *Approx.                         Base                               (Roof Edge to Roof Edge)                             (Wall to Wall)                                Opening

                     Size                               Size                             Width        Depth       Height               Width        Depth      Height             Width       Height      

 

                 10' x 12'                 121" X 143 1/4"               123 1/4"    145 3/4"      82 1/8"           118 1/4"    140 1/2"    80 7/8"            55 1/2"     69 1/4"     

      3,0 m x 3,6 m           307,3 cm x 363,9 cm               313,1 cm    370,2 cm     208,6 cm             300,4 cm    356,9 cm    205,4 cm           141,0 cm   175,9 cm

  Storage Area:    115 Sq. Ft.       734 Cu. Ft.

 

                 10,7 m

2

             20,8 m

3

 

 

BUILDING DIMENSIONS  * Size rounded off  to the nearest foot

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST  BE TAKEN WHEN  HANDLING THE VARIOUS 

PIECES TO AVOID A MISHAP. FOR SAFET Y SAKE, 

PLEASE READ SAFETY INFORMATION PROVIDED IN 

THIS MANUAL BEFORE BEGINNING CONSTRUCTION. 

WEAR GLOVES WHEN HANDLING METAL PARTS.

Missing Parts, Questions on Assembly?

Call:  1-800-851-1085 or 

[email protected]

Do not return to dealer, they are not 

equipped to handle your requests.

 

BU01

ED1012 B1 ED1012AP B1 ED1012L A1

ED1012Z SBVD1012 E1 697.68619 B1 VD1012 E1

VD1012EU E1 VDGY1012 A VDGY1012EU A

WR1012 WR1012EU

Summary of Contents for 697.68619 B1





































Reviews: