background image

* Size rounded off to the nearest foot

BUILDING DIMENSIONS

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
WHEN HANDLING METAL PARTS.

708850107

Model No.

VD108-A

697.68618

Owner's Manual & Assembly Instructions

   Y01

                                                                       Exterior Dimensions             Interior Dimensions             Door

       *Approx.       Foundation        Storage Area           (Roof Edge to Roof Edge)              (Wall to Wall)               Opening
           Size               Size             Sq. Ft.  Cu. Ft.        Width      Depth      Height      Width     Depth    Height   Width  Height

         10' x 8'     121" x 92 3/4"           74        470         123 1/4"    95 1/4"     82 1/8"     118 1/4"       90"      80 7/8"  55 1/2" 69 1/4"

3,0m x 2,3m  307cm x 236cm        6,9m

2

    13,3m

3

        313cm       242cm       209cm        300cm      229cm     205cm    141cm   176cm

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for 697.68618

































Reviews: