![background image](http://html1.mh-extra.com/html/arlight/sr-2833k8/sr-2833k8_product-data_2973065001.webp)
RF Single Color Remote Controller
09.283K8.04271
Note:Before the first use, please remove the protective film on the battery.
Function introduction
Important:
Read All Instructions Prior to Installation
Output
RF signal
Operation Frequency
869.5/916.5/434MHz
Operating temperature
0-40°C
Relative humidity
8% to 80%
Dimensions
136.3x38.9x10.7mm
Front side
Back side
•
Control 8 zones of receivers separately
• Single color controller
• Compatible with all universal series RF receivers
• 1 receiver can be paired by max 8 different remote controls.
• Waterproof grade: IP20
Product Data
•
This device contains a button lithium battery that shall be stored and disposed properly.
•
DO NOT expose the device to moisture.
Safety & Warnings
Power Supply
3V(1xCR2025 battery)
Click to turn on of all zones
Each button controls one zone of
receiver separately, Click to turn on/off,
Press and hold down to increase/
decrease light intensity
Click to turn off of all zones
Step 3:
Choose and click a zone number(
e.g.
zone
8
), LED lights connected with the
RF receiver flicker once means the receiver is paired with zone 8 successfully.
Step 2:
three times continuously to set it into pairing status
Click the “
Learning Key
” button on RF receiver or re-power on the receiver
Note: one receiver can be paired with max 8 remote controls.
Learning
Key
RF LED Receiver
Step 1:
Do wiring the RF receiver according to wiring diagram(please refer to the
instruction of RF receiver that you would like to pair with.
Pair with RF receiver