background image

(B)

VG085            Cradle for Sony PSP

Step 1.

Step 2.

Step 3.

Insert PSP into the cradle at a slant so that the base of the PSP 
comes to rest on the spring loaded support legs (C). 

While firmly holding the cradle, push downward on the PSP so 
that the spring loaded support legs slide down. This allows 
enough clearance for the top of the PSP to slide under the top 
support clip (D).

To remove PSP from cradle follow step 2

Sony PSP Cradle Instructions

 

(C)

(D)

 

VG085

 

Consumer Hotline: 
(USA)    (800) 841-0884
(INT'L)   (626) 254-9005
               Mon-Fri. 9am-5pm, PST

www.arkon.com

Arcadia, CA 91006 USA

Made in Taiwan

© Copyright 2007 Arkon Resources, Inc.

The Mobile Mounting Specialists

TM

PSP is a trademark of Sony Computer Entertainment Inc.

Arkon Resources, Inc. is not affiliated with Sony Computer Entertainment Inc.

Step 1. Attach the PSP cradle to the dual-T tab head (A) by inserting 

the T-tabs into the T-slots (B). 

Cradle Attachment

(A)

Safety Precautions

Do not install Arkon products over an air bag cover or within the air 
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or 
air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to 
your car, your device, or yourself due to the installation or use of the 
pedestal mount.

Reviews: