SHARK
_SUB
Unpacking:
to remove the Shark from the shipping box carefully follow these steps
Installation:
the Shark_Sub loudspeaker can be installed either indoor and outdoor, on wall, on ceiling or between tree
branches; to fix the module use the appropriate mechanic and shown in the images.
In the case you decide to use the metal tube fixing option, insert the steel tube into its seat connected to the ball
joint till it stops, then block the tube tightening the two miniscrews, making sure to lock them into the proper
holes on the tube. Proceed according to the different anchoring options like shown below.
Connection to the body
Connection to the ceiling - Indoor - (VPERG anchoring)
Connection to the wall
Indoor/Outdoor - (FK-12 clamp)
2.
1.
3.
Speaker type
2 x 6” woofer
Nominal impedence
4 Ω
Crossover
no crossover on board - DSP
needed (HP 35 Hz 12dB/oct
min; LP 120 Hz 12 dB/oct min)
Frequency range
38-150 Hz (-6dB)
Sensitivity (1W-1m)
90 dB
Speaker Max Power
600W
Speaker RMS Power
300W
500W (Class D)
SOUND OUTPUT
Material
composite material available in
black or white
Mechanic material
stainless steel
Dimensions
1283 x 310 x 285 mm
Weight
11 kg
SPECIFICATIONS
1283
285
310
Lay the box on a counter that makes
unpacking comfortable and proceed to
open the box.
Gently lift the module, which is firmly
kept safe into the box by its packaging,
and remove the molded foam.
Remove carefully the module from the
protective plastic envelope and proceed
to installation.
