CEALJ2T
1
rev. 06/11/12
This operaTing manual conTains imporTanT
safeTy informaTion. read carefully and
undersTand all informaTion before operaTing
Tool. save This manual for fuTure use.
The cealJ2T aluminum service JacK conforms To:
•
en 1494:2000 sTandards
•
ansi/asme pald sTandards
sTudy, undersTand and folloW all insTrucTions before operaTing This
device. do noT eXceed raTed capaciTy. use only on hard level surfaces
capable of supporTing The load.
This is a lifTing device only. immediaTely afTer lifTing, supporT The
vehicle WiTh appropriaTe means.
do noT move or dolly The vehicle While on The JacK. lifT vehicle only in
areas specified by The vehicle manufacTurer.
no alTeraTions shall be made To This producT.
do noT use JacK in adverse or eXTreme WeaTher condiTions, in sTrong
magneTic fields, in Windy condiTions, or on uneven or unsTable ground.
use of floor JacK near sTaTic elecTriciTy is noT recommended.
do noT handle loads ThaT mighT lead To dangerous siTuaTions
(for eXample: acids, radioacive maTerial, briTTle or fragile loads)
insTrucTions, safeTy informaTion, and safe operaTing procedures
musT be communicaTed in The oWner/operaTor's naTive and undersTood
language prior To auThoriZed use. maKe sure The oWner/operaTor is
fully aWare of safe use and inherenT dangers associaTed WiTh This
producT.
dispose of used hydraulic JacK oil in accordance WiTh local
regulaTions.
clear The area of bysTanders, especially small children, Tools or
oTher obJecTs before using.
lifTing of people WiTh The floor JacK is prohibiTed.
do noT use floor JacK in direcT conTacT WiTh food or food ingredienTs.
use of floor JacK on sea vessels is prohibiTed.
inspecT JacK prior To each use. do noT aTTempT use if The uniT is
broKen, benT, cracKed, or has missing and/or damaged parTs. replace
broKen, benT, cracKed, missing and/or damaged parTs, and/or missing
labels, Warnings, and/or decals WiTh facTory auThoriZed parTs prior
To use.
any JacK ThaT appears To be damaged or has Worn parTs should be
removed from service immediaTely.
for your safeTy and To prevenT inJury use service JacK for lifTing
purposes only.
alWays supporT vehicle WiTh JacK sTands.
failure To heed These Warnings may resulT in personal inJury and/or
properTy damage.
CEALJ2T
(2T US ANSI) 1,814 kg CApACITy ALUmINUm SErvICE JACk
pArTS BrEAkDOWN AND OpErATINg mANUAL
PRIOR TO OPERATION
Air may become trapped in the hydraulic system during transit.
To purge air:
1. Open release valve by turning handle counterclockwise.
2. Pump handle rapidly 4 full strokes. This will expel air that
may have entered hydraulic fluid passages during transit.
3. Close release valve by rotating handle clockwise and
pump handle.
4. If lift arm raises to full height, jack is ready for use.
If not, repeat this procedure or follow trouble shooting
instructions provided.
MAINTENANCE AND INSPECTION
IMPORTANT:
When adding or replacing hydraulic fluid,
always use a quality hydraulic fluid. DO NOT use brake fluid,
alcohol, glycerin, detergent motor oil, or dirty oil as improper
fluid can cause serious internal damage to jack.
To add hydraulic fluid:
With saddle fully lowered and jack
on level ground, remove filler plug. The hydraulic fluid should
just cover the surface of the internal cylinder visible through
the hole. Do not overfill. Replace filler plug. If low, add
hydraulic fluid as needed.
Maintenance and Inspection:
The owner and/or user
must maintain and inspect the jack in accordance with the
manufacturer’s instructions.
SPECIFICATIONS:
Capacity
(2T US ANSI) 1,814 kg Maximum
Minimum Height
89 mm
Maximum Height
498 mm
Length
673 mm
Chassis Width
330 mm
Handle Length
1270 mm
Saddle Diameter
114 mm
Net Weight
21.5 kg
Shipping Weight
23 kg
