• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1.
place aquarium on
Strong, Stable Surface
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
Betta
Falls
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1.
place aquarium on
Strong, Stable Surface
• Carefully pour rinsed gravel
into middle of each aquarium.
• Spread gravel evenly
around aquarium bottom.
• Gravel depth should measure
about 1" from the bottom.
Betta
Falls
See reverse for additional information.
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1.
place aquarium on
Strong, Stable Surface
Betta
Falls
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1.
place aquarium on
Strong, Stable Surface
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
filter chamber until it fills completely without
overflowing in the aquarium chamber.
• Once water in filter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
4.
add
Water to Filter Chamber
• Place aquarium evenly on a level
surface so that all sides of aquarium
are supported.
• Surface should be able to easily
support more than 50 lbs.
Make sure surface is level
1.
place aquarium on
Strong, Stable Surface
Fill to “Max” level on indicator
• Slowly pour room-temperature water into
filter chamber until it fills completely without
overflowing in the aquarium chamber.
• Once water in filter chamber has emptied,
check “Max” level indicator to see if more
water should be added. If so, repeat step
above until water level reaches “Max”.
4.
add
Water to Filter Chamber
