![background image](http://html1.mh-extra.com/html/aqua-one/nautilus-2700/nautilus-2700_troubleshooting_2958885001.webp)
Inspiring Excellence in Fish Care!
Nautilus
2700
The filter unit is leaking
1. Check that all o-rings are in place and that
they are not damaged or soiled.
2. Re-apply aquarium safe lubricant to
o-rings.
3. Check that the media baskets are aligned
properly.
4. Ensure that the quick release tap
connector is inserted correctly and locked
into position.
The filter will not prime
1. Check the tubing for kinks.
2. Ensure that the quick release tap
connector is inserted correctly and locked
into position.
3.
Check that the aquarium is filled with water.
4. Make sure that the intake pipe and/or
intake strainer are not blocked.
5. Ensure that the hoses are connected to
the unit correctly. IN to IN and OUT to OUT.
6.
Ensure the canister has no water in it.
The filter will not start
1. As previous tips.
2. Check the impeller and shaft are in good
condition.
3. Verify that the filter is plugged in.
Low water flow
1. As both previous tips.
2.
Clean the filter media.
3. Clean the inlet and outlet pipes.
4. Clean all tubing.
Both water & air coming from the
outlet pipe
1. Leave for 3-5 minutes.
2. Make sure that no air stone is operating
near the intake strainer.
3.
Check all tubing is connected firmly.
4. Check all o-rings and re-apply aquarium
safe lubricant.
5.
Gently rock the filter back and forth trying
to discharge the air in the canister.
The filter is making noise
1. As per previous tips
2.
Outlet or inlet flow is restricted. Check
tubing.
Trouble Shooting