<< CO
2
reactor 500 <<
Use this reactor to replace CO
2
loss in freshwater or saltwater. This reactor has been designed for
underwater operation only. Read and follow all instructions in this leaflet carefully for best results.
fig 2: reactor
1. CO
2
- reactor
2. flow adjustion valve
3. rubber
sucker
4. lid with inner pipe
5. bottom
lid
6. spiral
tube
7. closing
cap
8. water
connection
9. CO
2
connection
10. spare port
11. adjudtion valve
technical characteristics
unit
CO
2
art no:
71111
CO
2
- connection port:
9 mm
CO
2
input tube connection
6 /4 mm, (1/4“)
water flow
min 500l/h ( 125 gph),
max 1000 l/h (250 gph)
holding system
rubber sucker
The unit is designed for aquariums up to 500 l ( 120 gal) and 10°KH (4 mmol alcalinity). It can be
increased with up to 4 enlargements. Each enlagrement will increase the capacity for 300 l (80 gal).
