background image

        

 

1

 

  

  

WARNING

Safety Information  

 

 

Your pool is designed for years of pleasurable, safe 
family fun. But when used incorrectly, a swimming pool 
can be dangerous. To insure your pool is used safely, 
you MUST observe the following safety precautions:  

 

- Do not dive!- Do not jump!-No rough play!- no 
running or pushing. 

 

- Do not walk on the top rail. It can be slippery & is not 
a walkway.  

 

- Be sure to install all safety labels provided with your  
pool according to the instructions.  

 

- Keep a safety rope 1/4” by 50’ with a floatation buoy  
with an outside diameter of 15”. Have accessible in  
prominent area by your pool.  

 

- Post near all entrances to the pool area a list of 
phone numbers of the:  

• Nearest available police  
• Nearest available fire department  
• Nearest available rescue unit  
• 911 emergency number if available  
• Nearest ambulance service  
• Nearest available hospital  
• Nearest available physician  

 

- Provide fencing or enclosure, which is independent of 
the house as a closure around the entire pool area. 
The fence must be made of durable material to make 
pool inaccessible to toddlers and uninvited guests.   

 

- Make sure gate is always closed, Be sure to follow 
local building code requirements for load capacity and 
fencing. 

   

- Check with your local town for any special laws in 
your locale.  

 

- Never drink alcoholic beverages or use any 
intoxicants, which could hinder your judgment or 
reflexes.  

 

- Never use pool alone. All children must be 
supervised continuously.  

 

- Do not use pool if bottom is not clearly visible: At 
night sufficient lighting must be available. It is the 
pool owner’s sole responsibility to provide adequate 
lighting for pool bottom, safety signs and walkways, 
which exceed the standards of the EIS of North 
America.  

 

- Do not climb, stand or sit on any pool structure or 
the filter system. Components such as the filtration 
system, pumps, and heater must be positioned so as 
to prevent their being used as a means of access to 
the pool by young children.  

 

- Be sure that all toys, chairs and tables or similar 
objects that a young child could climb on are at least 
4 feet away from pool.  

 

- Do not use pool during electrical or rain storms  
- See available National Spa and Pool Institute 
(NSPI), publications for more tips on pool safety. 

 

 

IMPORTANT NOTICE! 

READ BEFORE INSTALLATION       

                                               

 

The safety stickers must be installed as per following instructions. Failure to 

properly install warning labels will void warranty. Failure to mount these safety 

labels may subject you to substantial liability in case of injury. 

 

  

 

CREATION/GENESIS

 

1

Summary of Contents for CREATION

























Reviews: