background image

Italiano

English

Français

Deutsch

Español

BUT DE LA NOTICE

Cette notice a étée réalisée par le constructeur et fait partie intégrante du produit.
Les informations qui y sont contenues s’adressent aux opérateurs spécialisés qui effectuent les opérations 
d’installation et d’entretien extraordinaire. Ceux-ci doivent posséder les compétences et les qualités requises 
pour effectuer de façon correcte et en toute sécurité les interventions dont ils sont chargés. La constante 
observation de ces informations garantit la sécurité des personnes, une économie d’utilisation et une plus 
longue durée de vie du produit. Lire attentivement cette notice et en respecter scrupuleusement les informations 
pour éviter toute fausse manoeuvre qui pourrait entraîner des accidents. Après en avoir effectué la pose, 
l’opérateur devra en vérifi er la bonne installation et le bon fonctionnement .
Il devra ensuite informer l’utilisateur de l’emploi correct du produit et lui remettre toute la documentation 
prévue par le fabricant.
Les instructions, les dessins, les photos et la documentation contenus dans ce manuel sont la propriété 
de la société APRIMATIC S.p.a et ne peuvent être reproduits sous aucune forme, ni intégralement, 
ni partiellement.
Le logo “APRIMATIC” est une marque enregistrée de APRIMATIC S.p.a.

OBJETO DEL MANUAL

Este manual ha sido redactado por el constructor y forma parte integrante del producto.
Las informaciones que contiene van dirigidas a los operadores especializados encargados de las operaciones 
de instalación y mantenimiento extraordinario. Dichos operadores deberán poseer la competencia especifi ca y 
las capacidades necesarias para llevar a efecto correctamente y en condiciones de seguridad las operaciones 
de las que están encargados. El cumplimiento constante de estas instrucciones garantiza seguridad del 
personal, economía de uso y un funcionamento más duradero del producto. A fi n de evitar maniobras 
incorrectas con el consiguiente riesgo de accidentes cabe leer con atención este manual y respetar 
escrupulosamente las instrucciones. El operador especializado, después de realizar la instalación, 
deberá comprobar la correcta ejecución de la misma y el buen funciomento del producto. También 
deberá enseñar al cliente cómo utilizar correctamente el producto, entregando toda la documentación 
facilitada por el constructor.
Las instrucciones, los dibujos, las fotografías y la documentación que contiene este manual son propiedad de 
APRIMATIC S.p.a. y no pueden ser reproducidas en ninguna manera, ni integral ni parcialmente. El logotipo 
“APRIMATIC” es una marca registrada  de APRIMATIC S.p.a.

ZWECK DES HANDBUCHS

Dieses Handbuch wurde vom Hersteller verfasst und ist wesentlicher Bestandteil des Produkts. Die darin 
enthaltenen Informationen richten sich an erfahrenes Personal, das sowohl für die Montage als auch die 
außerordentlichen Wartungen zuständig ist. Dieses Personal muss über die erforderlichen Fähigkeiten 
und Fachkenntnisse verfügen, um die Arbeit korrekt und unter sicheren Bedingungen durchführen zu 
können. Die strikte Beachtung der Anweisungen gewährleistet Sicherheit, einen wirtschaftlichen Betrieb 
und eine längere Lebensdauer der Anlage. Zur Vermeidung von Fehlern, die zu Unfällen führen können, 
muss das vorliegende Handbuch aufmerksam durchgelesen werden, wobei die darin enthaltenen 
Anweisungen genau zu befolgen sind. Nach dem Aufbau der Schranke muss erfahrenes Fachpersonal 
die korrekte Montage und den störungsfreien Betrieb sicherstellen, den Benutzer einweisen und ihm die 
Dokumentation des Herstellers aushändigen.
Die in diesem Handbuch enthaltenen Anleitungen, Zeichnungen, Fotos und Dokumentationen sind Eigentum von 
APRIMATIC S.p.a. und dürfen auf keine Art ganz oder teilweise reproduziert werden. Das Logo “APRIMATIC” 
ist ein eingetragenes Warenzeichen von APRIMATIC S.p.a.

PURPOSE OF THE MANUAL

This manual was drawn up by the manufacturer and is integral part of the product.
The information it contains is addressed to expert operators that carry out the installation and maintenance 
operations. They must have the specifi c qualifi cations and training to carry out this work correctly and under the 
maximum safety conditions. Strict observance of the instructions contained in the manual will ensure safety, 
optimum operation and prolonged functioning of the product. To avoid incorrect manoeuvres and therefore the 
risk of accidents, it is essential to read this manual with care and strictly follow all the instructions given. The 
expert installer, after completing installation must verify that this has been performed correctly and that the 
product functions smoothly. Subsequently, it is necessary to instruct the user on the correct use of the product 
providing all the documentation envisaged by the manufacturer.
Instructions, drawings, photos and literature contained herein are exclusive property of APRIMATIC S.p.a. and 
cannot be reproduced by any means. The “APRIMATIC” logo is a registered mark of APRIMATIC S.p.a.

Istruzioni per Installazione,

Uso  e  Manutenzione

Installation, use and maintenance  

instructions

    

Notice d’installation 

et d’entretien

Anleitung für Montage, Gebrauch 

und Wartung

Instrucciones para la instalación 

uso  y  mantenimiento

SCOPO DEL MANUALE

Questo manuale è stato redatto dal costruttore ed è parte integrante del prodotto. 
Le informazioni in esso contenute sono dirette agli operatori esperti che eseguono l’installazione e la 
manutenzione straordinaria. Essi devono possedere competenze specifi che e particolari capacità per eseguire 
correttamente ed in sicurezza gli interventi di loro competenza. La costante osservanza delle informazioni 
garantisce la sicurezza dell’uomo, l’economia di esercizio ed una piú lunga durata di funzionamento del 
prodotto. Al fi ne di evitare manovre errate con il rischio di incidenti, è importante leggere attentamente questo 
manuale, rispettando scrupolosamente le informazioni fornite. L’operatore esperto, dopo aver effettuato l’intervento 
dovrá constatarne la corretta installazione ed il regolare funzionamento. Successivamente dovrá istruire l’utente 
sull’uso corretto del prodotto rilasciando tutta la documentazione prevista dal costruttore.
Le istruzioni, i disegni, le fotografi e e la documentazione contenuti nel presente manuale sono di proprietà 

APRIMATIC S.p.a. 

e non possono essere riprodotti in alcun modo, né integralmente, né parzialmente.

Il logo “APRIMATIC” è un marchio registrato di 

APRIMATIC S.p.a. 

cod. B4813000 - gennaio 2007

HARRIER

Barriera elettromeccanica per il controllo di traffi co esclusivamente veicolare

Electro-mechanical vehicular traffi c control barrier

Barrière électromécanique pour contrôle de trafi c exclusivement véhiculaire

Elektromechanische Schranken ausschließlich zur Kontrolle des Fahrzeugverkehrs

Barrera electrómecanica para controlar el tráfi co de vehículos

Summary of Contents for Harrier E25

































































Reviews:

Related manuals for Harrier E25