10-2003, OdaLog Surface-Mount Antenna Installation Guide
Revision: 1 , 31/05/2010
ODALOG SURFACE MOUNT ANTENNA – INSTALLATION GUIDE
Package Contents:
1.
OdaLog® Surface-Mount Antenna kit (PN: 11-2001), Consisting of:
•
OdaLog Surface-Mount Antenna
•
OdaLog Antenna Plug w/lead (total cable length 3.5metres)
•
Heatshrink (for sealing cable joiner connectors)
•
Installation Guide (this document)
Recommended Accessories
-
SOLD SEPERATELY
(or equivalent approved epoxy):
•
Megapoxy™ kit permanent adhesive kit (PN: 11-0070, one-time application)
Suitable to bond to metal, concrete/bitumen and some plastic surfaces: Part A/B
30ml syringes, mixing stick, gloves (latex or PVC - NOT nitrile)
Required Tools (not provided):
1.
Electric / Battery drill
2.
6mm drill bit (suitable for mounting material, e.g. metal, concrete etc...)
3.
Mixing bowl or cup (disposable, e.g. plastic – polystyrene not suitable)
4.
Marking Pen – Felt-Tip Marker or White-out correction pen
5.
Heat Gun (portable if mains power not available on location)
WARNING
When installing the OdaLog Surface-Mount antenna, it is a customer responsibility to strictly
adhere to all Local Laws, Regulations and Occupational Health and Safety precautions. Caution is
to be given when installing in a publically-accessibly area, that duty of care, requirements and
consideration for the location surroundings (e.g. vehicles, pedestrians, frequency of use).
GENERAL DISCLAIMER
The
OdaLog
®
Surface-Mount Antenna Kit
is sold subject to our standard terms and conditions of
sale and any written warranty given by App-Tek. App-Tek does not accept any other liability
either directly or indirectly for any losses suffered in connection with the use and application of
the OdaLog
®
Surface-Mount Antenna Kit
, whether or not in accordance with any advice,
specification, recommendation or information given by it or as a result of any errors or omissions
in this
Installation Guide
.
