![background image](http://html1.mh-extra.com/html/aparian/1756-a-pmio/1756-a-pmio_quick-start-manual_2951953001.webp)
Revision 1.1
04/2019
Document No. D137-011
Page
1
of
4
PMIO Scanner
Quick Start Guide
1756-A-PMIO
NOTE:
Before installing, configuring, operating, or maintaining Aparian products, please review this
information and the information located on
www.aparian.com
for the latest software,
documentation, and installation files specific to your Aparian product.
INTRODUCTION
The PMIO Scanner provides interfacing between a Rockwell Automation ControlLogix system and
Honeywell’s TDC 3000 PM/HPM/APM Input/Output Processors (IOPs).
The PMIO Scanner plugs directly into a ControlLogix chassis and connects directly into the TDC 3000
redundant I/O Link.
NOTE:
TDC 3000
and
Process Manager
are registered trademarks of Honeywell Inc.
REQUIRED SOFTWARE
The PMIO Scanner requires Aparian Slate software to setup and configure. The software installation can be
found at
www.aparian.com/software/slate
.