![background image](http://html.mh-extra.com/html/antaira/ars-7131-ac-series/ars-7131-ac-series_quick-installation-manual_2946731001.webp)
Antaira Technologies
ARS-7131-AC Series
Industrial 802.11a/b/g/n/ac Wi-Fi Access
Point/Client/Bridge/Repeater with Router Capabilities
Quick Installation Guide
Version 1.0
(January 2019)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
Package Check List
The package contains the following items:
⚫
1
– Quick Installation Guide
⚫
1
– ARS-7131-AC Series
⚫
1
– Wall Mounting Bracket Set with Screws
⚫
1
– Terminal Block
⚫
2
– External Antenna
Front Panel Layout
Top Panel View
ARS-7131-AC Series
’ top panel is equipped with one 6-pin
removal terminal block connector for dual DC power inputs
(9~48VDC).
Product Overview
System Interface/Performance
Qualcomm Atheros QCA9892
2*10/100Tx RJ45 Ethernet Ports
WLAN supports 2.4GHz Wi-Fi
Two External SMA Antennas
Power Input & Connection
DC 9~48V a 6-Pin Removal Terminal Block
Operating Temperature
Standard Operating Temperature: 0°C to 60°C
Extended Operating Temperature (-T): -35°C to 70°C
Case/Installation
IP30 Protection
Installation in a Pollution Degree 2 Industrial Environment
DIN-Rail and Wall Mount Design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Preconfigured alarms are detecting failure
Wi-Fi Signal
Strength
Green/Red
Red
Less than 25% signal strength
Green
LED 2 less than 50% signal strength
Green
LED 3 less than 75% signal strength
Green
LED 4 less than 100% signal strength
ETH Ports 1 & 2
(ACT)
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
ETH Ports 1 & 2
(LINK)
Amber
Amber
Link established
Off
No Link detected
Quick Installation
Ethernet Ports
RJ45 Ports (Auto MDI/MDIX)
All RJ45 ports are auto-sensing for 10Base-T and 100Base-TX
device connections. Please follow the wiring pin assignment
table below for Ethernet port installation.
Grounding Screw
(Behind)
Reset Button
LED for Activity Status
LED for Link Status
– 10/100Tx
LED for P1, P2, and Fault
Grounding Screw
6-Pin Removal Terminal Block
(Power Input)
Wi-Fi Signal Strength
Ethernet Port
Antenna Mount
Terminal Block