background image

Installation Guide

NXA-KLB 

Kensington Lock Bracket for NXT-1200V and -VG Series Panels

Overview 

The NXA-KLB (

FG2259-10

) is an optional accessory for AMX Table Top (NXT-) 1200V 

and VG-Series touch panels, which allows you to use a standard Kensington Lock 
System to prevent theft. 

The Kensington Lock System itself (including lock, key and security cable) is sold 
separately.

The Kengsington Lock System is a security system from Kensington Technology 
Group (

www.kensington.com

) that discourages the theft of portable computers and 

other devices (in this case touch panels) by using a security cable and lock to anchor 
the panel to an object in the room. The security cable is looped through a permanent 
object in the room, then looped through itself and locked into the slot. Once secured in 
this way, the panel cannot be removed from its location unless it is unlocked (using the 
key that comes with the Kensington Lock assembly). 

The NXA-KLB Bracket attaches to the base of the Table Top 1200V and VG-Series 
panels (listed below) using keyed-lock securing screws that can only be removed with 
the included AMX Keyed-Lock screw driver adapter. This screwdriver head fits into 
most hex-type screwdrivers or electric drills. 

There are two versions of the Bracket included with the kit, as indicated in FIG. 1:

The 

Flat Lock Bracket

 fits neatly into the rear of the panel’s base, allowing you 

to close the rear connector plate cover on the base while the panel is secured.

The 

Raised Lock Bracket

 

also

 

allows you to use the Kensington Lock System 

to secure the panel, while providing a surface to which you can secure incoming 
cables.  

Product Specifications  

Preparing the Touch Panel to Install the NXA-KLB

1.

Gently place the touch panel LCD facedown onto a soft cloth to expose the 
under-side of the base and prevent scratching of the LCD (FIG. 2).

You may find it easier to handle the panel if you carefully detach all connectors.

  

2.

Tilt the base forward so that the bottom surface of the base is easily accessible. 
This provides access to the underside of the unit and exposes the securing loca-
tion for the Kensington Lock Bracket (FIG. 2).

3.

Determine which type of bracket (

Raised

 or 

Flat

) you will be installing:

If your installation requires secured cables, use the Raised Lock Bracket.

If your installation requires a low-profile security solution, use the Flat Lock 

Bracket.

Method A: Installing the Raised Lock Bracket

Note that once installed, the shape of the Raised Lock Bracket will not allow the 
Connector Plate Cover on the base of the panel to be closed.

1.

Raise the Connector Plate Cover, and align the openings on the bottom of the 
Raised Lock Bracket to the securing locations on the Base Plate of the panel 
(FIG. 2).  

2.

Insert two Keyed-Lock Securing Screws into their respective locations (FIG. 3).

3.

Use the Keyed-Lock screwdriver adapter to tighten these screws, securing the 
Raised Lock Bracket to the base plate (FIG. 4).  

4.

Thread the incoming cables through the opening between the bottom of the 
Raised Bracket and the Base Plate (FIG. 4).

5.

Reconnect the cables (on the rear connector plate). 

6.

Thread a tie-wrap (not included) through the center pair of circular openings on 
the bracket (FIG. 5) and use it to secure

 

all of the NXA-MTC/RGB cables to the 

bracket. Trim off any excess length on the tie-wrap (if necessary). 

FIG. 1  

NXA-KLB Components

NXA-KLB Specifications

Compatible AMX 
Touch Panels:

• NXT-1200V, 12" Modero Video Table Top Panel (FG2250-60)
• NXT-1200VG, 12" Modero Multimedia Table Top Panel (FG2250-61)
• NXT-1500VG, 15" Modero Multimedia Table Top Panel (FG2252-61)
• NXT-1700VG, 17" Modero Multimedia Table Top Panel (FG2257-61)

Requirements:

• The NXA-KLB must be used with a standard Kensington Lock System

Note

: The Kensington Lock System must be purchased separately, and is 

not provided by AMX.

Included 
Accessories:

• Raised Lock Bracket (with cable tie down) (black)
• Flat Lock Bracket (black)
• AMX Keyed-Lock screwdriver adapter
• Keyed-Lock Securing Screws (5)

Raised Lock Bracket

Flat Lock Bracket

Keyed-Lock

Securing Screws

AMX Keyed-Lock screwdriver adapter
(fits into any standard hex-type
screwdriver or drill)

FIG. 2  

Location of the securing locations on an NXT (Table Top) panel

FIG. 3  

Raised Kensington Lock Bracket Components and Installation

FIG. 4  

Raised Securing locations

Base plate

Connector plate cover (open to access the

Securing locations for Kensington Lock Brackets

Touch Panel glass (facing down)

connectors on the rear of the base)

Raised Lock Bracket

Keyed-Lock Securing Screws

Kensington Lock/Security Cable

 assembly (not included)

AMX Keyed-Lock screwdriver adapter

Connector plate cover

Securing locations

Thread incoming cables through this

Base Plate

Raised Lock Bracket

Kensington Lock/Security Cable
assembly (not included)

opening between the Bracket
and the Base

Reviews: