background image

MOBILE SIGNAL BOOSTER

Instruction Manual

Mobile phone repeater system is designed to take and amplify existing mobile phone signal in outdoor, and then 
rebroadcast amplified mobile phone signals to indoor areas which have weak signal or no signal at all.

SKU:  AG10(P)  WR1800(P)  WR2100(P)

The mobile phone repeater works by placing an outdoor aerial on your roof. The outdoor antenna is high gain and can 
receive even a weak signal and establishes a connection to the nearest mobile mast.

The outdoor aerial captures signal from your network provider’s mast and passes it into your building through a cable. 
The cable connects the mobile phone repeater, which amplifies and rebroadcasts a high signal within the building. 

Remarks:
Recommended outdoor antennas are logarithm antenna and panel antenna.  Recommended indoor antennas are panel antenna
ceiling antenna and whip antenna. You need to buy antennas, surge protector, splitter, coupler and cable separately.

Logarithm Antenna

Surge Protector

Splitter / Coupler

Panel Antenna

Coaxial Cable

Coaxial Cable

Wall Outlet

Panel Antenna

Ceiling Antenna

Whip Antenna

GSM Repeater Systems & Accessories 

www.amsberg-repeaters.com

Summary of Contents for AG10P







Reviews: