The TDX20 comes with
a suite of pre-installed
applications as a part
of our
DC Suite
. These
applications were
developed for
common data
collection tasks and
are ready to go right
out of the box.
Dashboard
All applications are
launched from here.
As future
applications are
developed, they will
be made available
on the web at
barcodepower.com
.
1
Charge the TDX20 for 6 hours
Use the USB cable and the optional adapter to charge
from a 110VAC wall outlet.
Scan Key
Power
Button
T9 Keypad
LCD
TDX20
Wireless
Handheld Computer
Quick-Start Guide
800.648.4452
www.amltd.com
02162016
DC Uplink
DC Suite Software
DC Suite Software
Download DC Console
Powering Up
Charging
Physical Features
Power Button
2
Starting up the TDX20
Power and Reboot Procedures
•
If left idle for 30 minutes, the TDX20 will automatically
power down.
•
Pressing the power button briefly, while the unit is on,
will either put the TDX20 into suspend mode, or wake it
up depending on its current state.
•
Pressing and holding the power button for more
than 3 seconds causes the TDX20 to power off.
•
Pressing the power button while
the TDX20 is OFF powers up and
re-boots the unit.
•
While charging, the TDX20
display will go dark after a time
set in the ‘Display Properties’
settings in Windows® Control
Panel. Touching the screen or
any key will awaken it from this
idle state.
3
Download
DC Console
Download the DC Console utility at
www.barcodepower.com
Utilize
DC Console
to
quickly modify existing
applications or create
new ones and transfer
files from your TDX20 to
your PC.
Note:
Microsoft ActiveSync works only with
Windows
®
XP or earlier.
Note:
The Windows Mobile Device Center is only
supported on Windows Vista
™
or later.
IMPORTANT!
Users must install either Microsoft
®
ActiveSync
®
or Windows
®
Mobile Device Center
®
before
installing AML
DC Console
.
Other Apps:
Item Count
Simple one-field scanning.
Item Quantity
Scan the Item Number and key in the
Quantity.
Item Serial
Scan in Item Number and the unique
Serial Number.
Item Lot Quantity
Scan the Item Number and then collect
Lot Number and Quantity information.
Asset Tracker
Asset Tracking application.
Check In/Out
Check-In/Out application for tool or
part rooms.
Compare
Compare two scans and confirm that
they are the same OR not the same.
The DC Uplink app provides a
wireless way to send data files
and update relevant lookup
files, on the device, using a
local network with a wireless
access point. The user interface will display any
data files created by other DC Suite apps.
The interface will also display lookup files that are
configured to update (using DC Console). These
files can be selected and synced, provided that
DC Console or DC Sync server is running. This also
requires that DC Suite and DC Console (or DC
Sync) end points are configured correctly (IP
Address and Port).
DC Uplink requires a license that is typically
purchased at the same time as the TDX20.
Scan Engine
Window
USB Charging &
Communications Port
Bottom
Top
10312016-1
