background image

©Copyright Amkus Rescue Systems, Inc. 2012- 2017 

LAP-009 May 3, 2017 Rev05

DANGER

Understand  manual  before  use.  Operating  AMKUS  Rescue  Systems  without  understanding 

the manual, receiving proper training, and using appropriate personal protective equipment is 

a  misuse  of  AMKUS  equipment.  This  manual  does  not  fully  address  safety.  Additional  safety 

information  is  published  in  AMKUS  Safety  Manual  LAA-001.  Obtain  safety  information  at 

www.amkus.com/resources/information

Manual: GH2S2 Series

Power Unit

AMKUS RESCUE SYSTEMS

www.amkus.com

4201 Montdale Drive, Valparaiso, IN 46383-4098 USA

800-592-6587 • 219-548-5000 • Fax 219-476-1669

This manual is intended for use with manuals published by manufacturers of the prime movers (engine and 
pump) used in this power unit.

Certifi ed Model

NFPA 1936, 2015 Edition

©Copyright Amkus Rescue Systems, Inc. 2016 

LAA-001 April 15, 2016 Rev00

DANGER

Understand manual before use. Operating AMKUS Rescue Systems without understanding the 

manual,  receiving  proper  training,  and  using  appropriate  personal  protective  equipment  is  a 

misuse of AMKUS equipment. Obtain safety information at www.amkus.com/

This Safety Manual is intended to familiarize rescue workers and maintenance personnel with the safety messages of AMKUS 

Rescue Systems, including powered rescue tools (rams, cutters, spreaders, combination tools), power units (electric or gasoline

driven), and powered rescue tool components (cable assemblies, hose assemblies, hose reels, etc.). The safety messages in this 

publication supersede safety information appearing in AMKUS publications prior to April 2016. 

This manual is intended for use with manuals published by manufacturers of prime movers (engines, electric motors, and pumps) 

used in AMKUS power units.

This manual does 

NOT

 address operation or servicing of AMKUS Rescue Systems. Only competent rescue tool repair technicians 

are quali

¿

 ed to repair AMKUS equipment. This manual should be available to all personnel involved with AMKUS equipment.

SAFETY MANUAL for AMKUS 

RESCUE SYSTEMS

AMKUS RESCUE SYSTEMS

www.amkus.com

4201 Montdale Drive, Valparaiso, IN 46383-4098 USA

800-592-6587 • 219-548-5000 • Fax 219-476-1669

 EN13204 Designation:  MTO

GH2S2-XL

GH2S2-XLNT

GH2S2-STD

 Power unit with cage and hose hoop

Power unit with cage

Power unit with carrying handle

Summary of Contents for GH2S2 Series









Reviews: