background image

WILLIAMSBURG  ELITE™ 5’ INTEGRAL APRON

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

WILLIAMSBURG ELITE™ 5’ INTEGRAL APRON
WHIRLPOOL

Comfortable bathing design with form-fitted
backrest and molded-in armrests

2425E-LHO Left Hand Drain Outlet

(specify White 020, Bone 021, or Linen 222)

2425E-RHO Right Hand Drain Outlet

(specify White 020, Bone 021, or Linen 222)

• Acrylic with fiberglass reinforcement
•  Integral apron with removable access panel
•  Integral three-sided, tiling / water retention

flange

• 1.5 HP self-draining pump/motor

with dry run seal

• Eight multi-directional and flow adjustable jets

including:
Two high performance Ideal-flow™ Jets
Six interchangeable Flex-jets™

• Two silent air volume controls
•  Deck-mounted On/Off control
•  Complete factory installed and tested

whirlpool system

2425EC-LHO Left Hand Drain Outlet

(specify White 020, Bone 021, or Linen 222)

2425EC-RHO Right Hand Drain Outlet

(specify White 020, Bone 021, or Linen 222)

• Same as above with the StayClean™

whirlpool system featuring Antimicrobial
AlphaSan®

Nominal Dimensions:  
60” x 32” x 21-1/2”

(1524 x 813 x 546mm)

© 2003 American Standard Inc.

HD-016

SPS 2425E-LHO/RHO

Revised 6/03

Compliance Certifications -

Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage 

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density

* See American Standard Faucet Selector

NOTE:  Roughing-in dimensions and product
specifications shown on reverse side of page.

Components Needed:

Bath Filler*:  (specify finish)

Bath Drain:  BATH-DRAIN 
(specify Chrome 002, Polished Brass 099,

or Satin 295)

Custom Accessories Available:

Pulse Jet Kit: PULSE-JET (two per kit, specify
White 020, Bone 021, or Linen 222)

Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)

E-Z-Install™ Whirlpool Heater - EZHEAT-100

NOTE:  E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.

Reviews: