background image

ELLISSE ELITE™ 6’ x 48”

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

ELLISSE ELITE™ 6’ x 48” WHIRLPOOL

Comfortable two person design with generous
back support position and integral seat

2711E (specify White 020, Bone 021, or

Linen 222)

• Acrylic with fiberglass reinforcement
• 2.0 HP self-draining pump/motor

with dry run seal

• Six multi-directional and flow adjustable 

jets including:
Three high performance Ideal-flow™ Jets
Three interchangeable Flex-jets™

• Two silent air volume controls
•  Deck-mounted On/Off control
•  Complete factory installed and tested

whirlpool system

2711EC (specify White 020, Bone 021, or

Linen 222)

• Same as above with the StayClean™

whirlpool system featuring Antimicrobial
AlphaSan®

Nominal Dimensions:  72” x 48” x 21-1/2"
(1829 x 1220 x 546mm)

© 2003 American Standard Inc.

HD-004

SPS 2711E

Revised 6/03

Components Needed:

Bath Filler*:  (specify finish)

Bath Drain:  BATH-DRAIN 
(specify Chrome 002, Polished Brass 099,

or Satin 295)

Custom Accessories Available:

Pulse Jet Kit: PULSE-JET (two per kit,
specify White 020, Bone 021, or Linen 222)

Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)

E-Z-Install™ Whirlpool Heater - EZHEAT-100

Tile Bead Kit: TILE-BEAD

NOTE:  Roughing-in dimensions and product specifica-
tions shown on reverse side of page.

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage 

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density

* See American Standard Faucet Selector

NOTE:  E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.

Reviews: