CBI All In One UPS Power Solutions
CBI All In One UPS Power Solutions combine the requirements for several applications in just one device
which can be used as power supply unit, battery charger, battery care module or backup module. The
available power is automatically distributed among load and battery, while supplying power to the load
always is the first priority. The maximum available current of the load output is two times the value of
the device’s rated current.
If the device is disconnected from the main power source, the battery will supply the load until the
battery voltage reaches 1.5 V per cell. This prevents the battery from deep discharge. CBI devices
provide microprocessor controlled battery charging. Using algorithms, the battery’s condition will be
detected and based on that, an appropriate charging mode is chosen. The real-time diagnostics system
will continuously monitor the charging progress and indicate possibly occurring faults such as elements
in short circuit, accidental reverse polarity connection or disconnection of the battery by the battery fault
LED and a flashing code of the diagnosis LED. CBI All In One UPS Power Solutions are suitable for
open/sealed lead acid-, lead gel- and optionally Ni-Cd batteries. By using the battery-select-jumper, it is
possible to set predefined charging curves for those battery types. The available charging options are
recovery-, boost- and trickle charge.All CB devices are built in a rugged metal case with a DIN rail
mounting bracket.
• Nominal Input Voltage
115-230-277VAC
• Output Voltage
12VDC
• Output Current
3, 6, 10, 35A
• Adjustable Charging Current
20%-100% of Output Current
• Working temperature:
-25°C to 70°C
• EMC standards:
IEC/EN 60335-2-29 Battery chargers; EN60950 /
UL1950 Electrical safety; EN54-4 Fire Detection and
fire alarm systems; 89/336/EEC EMC Directive;
2006/95/EC (Low Voltage); DIN41773 (Charging cycle);
Emission : IEC 61000-6-4; Immunity: IEC 61000-6-2. CE
• Nominal Input Voltage
115-230-277VAC
• Output Voltage
24VDC
• Output Current
3, 5, 10, 20A
• Adjustable Charging Current
20%-100% of Output Current
• Working temperature:
-25°C to 70°C
• EMC standards:
IEC/EN 60335-2-29 Battery chargers; EN60950 / UL1950
Electrical safety; EN54-4 Fire Detection and fire alarm
systems; 89/336/EEC EMC Directive; 2006/95/EC (Low
Voltage); DIN41773 (Charging cycle); Emission : IEC 61000-6-
4; Immunity: IEC 61000-6-2. CE
• Nominal Input Voltage
115-230-277VAC
• Output Voltage
48VDC
• Output Current
5, 10A
• Adjustable Charging Current
20%-100% of Output Current
• Working temperature:
-25°C to 70°C
• EMC standards:
IEC/EN 60335-2-29 Battery chargers; EN60950 / UL1950
Electrical safety; EN54-4 Fire Detection and fire alarm
systems; 89/336/EEC EMC Directive; 2006/95/EC (Low
Voltage); DIN41773 (Charging cycle); Emission : IEC 61000-6-
4; Immunity: IEC 61000-6-2. CE
