background image

HONEYCOMB SHADES

PowerWand™

Thank you for your purchase. This shade has been custom built for you from the highest quality materials.  

To avoid errors and save valuable time, please read these instructions before installing your new shades

1.  Pencil or Marker
2.  Measuring Tape
3.  Flat head Screwdriver
4.  Carpenter’s Level
5.  Power Drill
6.  Mounting Fasteners

1

Getting Started  ................................................................................................................................................................................................ Page 2
Mounting Type  ................................................................................................................................................................................................. Page 2
Bracket Installation  .......................................................................................................................................................................................... Page 2
Inside Mount  .................................................................................................................................................................................................... Page 3
Outside Mount  ................................................................................................................................................................................................. Page 3
Installing the Wand  .......................................................................................................................................................................................... Page 4
Installing the Shade  ......................................................................................................................................................................................... Page 4
Removing the Shade  ....................................................................................................................................................................................... Page 4
Operating the Shade ........................................................................................................................................................................................ Page 5
Adjust Motor Limits (if desired)  ........................................................................................................................................................................ Page 5
Setting a Favorite Position  ............................................................................................................................................................................... Page 5
Charging the Motor Batter  ............................................................................................................................................................................... Page 5
Hold-Down Brackets (optional)  ........................................................................................................................................................................ Page 6
Adjusting the Shade ......................................................................................................................................................................................... Page 6 
Child Safety  ..................................................................................................................................................................................................... Page 6

Mounting Surface

Fastener

Drywall, Plaster

Wall Anchors, Expansion Bolts

(Not provided)

Metal

Sheet Metal Screws

(Not provided)

Wood

No. 6 Hex Head Screws

(Provided)

INSTALLATION INSTRUCTIONS

TOOLS YOU WILL NEED

TABLE OF CONTENTS

Summary of Contents for HONEYCOMB SHADES













Reviews: