EN
SHELLY DUO SMART BULB
The Shelly DUO (
WW/CW or RGBW model
) smart WiFi LED
bulb by Allterco Robotics is intended to be installed into a
standard light socket (E27/E26 or GU10) in order to change
the white temperature or color (depending on model) and to
dim the light. Shelly may work as a standalone device or as
an accessory to a home automation controller.
Specification
Power supply
110-230V ±10% 50/60Hz AC
Socket
E26/E27
GU10
Power Rating
9W
5W
Brightness
Up to 800 lm
Up to 400 lm
Color Temperature
WW/CW (2700K-6500K); RGBW
Beam Angle
190°
36°
Working temperature
From -20°C to 40°C
Complies with EU
standards
RED 2014/53/EU, LVD 2014/35/
EU, EMC 2004/108/WE, RoHS2
2011/65/UE
Radio signal power
1mW
Radio protocol
WiFi 802.11 b/g/n
Frequency
2400 – 2500 MHz;
Operational range
(depending on local
construction)
up to 30 m outdoors
up to 15 m indoors
Dimensions
60x122 mm
50x73 mm
Electrical consumption
< 1 W
Technical Information
• Control through WiFi from a mobile phone, tablet, PC, automation
system or any other device supporting HTTP and/or UDP protocol
• Microprocessor management
• Controlled elements: multiple LED diods
• Shelly may be controlled by an external switch
⚠
CAUTION!
Danger of electrocution. Plugging the device to
the power grid has to be performed with caution.
⚠
CAUTION!
Do not allow children to play with the device.
Keep the devices for remote control of Shelly (mobile phones,
tablets, PCs) away from children.
⚠
CAUTION!
Please handle with care! The Shelly
®
DUO is
FRAGILE!
Introduction to Shelly
Shelly
®
is a family of innovative Devices, which allow remote
control of electric appliances through mobile phone, PC or
home automation system. Shelly
®
uses WiFi to connect to
the devices controlling it. They can be in the same WiFi net-
work or they can use remote access (through the Internet).
Shelly
®
may work standalone, without being managed by a
home automation controller, in the local WiFi network, as well
as through a cloud service, from everywhere the User has
Internet access.
Shelly
®
has an integrated web server, through which the User
may adjust, control and monitor the Device. Shelly
®
has two
WiFi modes - access Point (AP) and Client mode (CM). To
operate in Client Mode, a WiFi router must be located within
the range of the Device. Shelly
®
devices can communicate
directly with other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly
®
devices
may be available for monitor and control even if the User is
outside the range of the local WiFi network, as long as the
WiFi router is connected to the Internet. The cloud function
could be used, which is activated through the web server of
the Device or through the settings in the Shelly Cloud mobile
application.
The User can register and access Shelly Cloud, using either
Android or iOS mobile applications, or any internet browser
and the web site:
https://my.Shelly.cloud/.
Installation Instructions
⚠
CAUTION!
Danger of electrocution. Before installing the
Device into the light socket please check if it has been pow-
ered off.
⚠
CAUTION!
Before beginning the installation please read
the accompanying documentation carefully and complete-
ly. Failure to follow recommended procedures could lead to
malfunction, danger to your life or violation of the law. Allterco
Robotics is not responsible for any loss or damage in case of
incorrect installation or operation of this device.
⚠
CAUTION!
Use the Device only with power grid which com-
ply with all applicable regulations. Short circuit in the power
grid connected to the Device may damage the Device.
⚠
CAUTION!
Please check the working voltage of the device
and the supplied voltage of your power grid before installing
the device! Installing the device to a non recommended power
supply may lead to malfunction, danger to your life or violation
of the law. Allterco Robotics is not responsible for any loss or
damage in case of incorrect installation or operation of this
device.
⚠
RECOMMENDATION!
The Device may be connected to and
may control electric circuits and light sockets only if they com-
ply with the respective standards and safety norms.
Declaration of conformity
Hereby, Allterco Robotics EOOD declares that the radio
equipment type Shelly DUO is in compliance with Directive
2014/53/EU, 2014/35/EU, 2004/108/WE, 2011/65/UE. The
full text of the EU declaration of conformity is available at the
following internet address:
https://shelly.cloud/declaration-of-conformity/
Manufacturer:
Allterco Robotics EOOD
Address:
Sofia, 1407, 103 Cherni vrah Blvd.
Tel.:
+359 2 988 7435
E-mail:
Web:
http://www.shelly.cloud
Changes in the contact data are published by the Manufac-
turer at the official website of the Device:
http://www.shelly.cloud
The User is obliged to stay informed for any amendments of
these warranty terms before exercising his/her rights against
the Manufacturer.
All rights to trademarks She
®
and Shelly
®
, and other intellec-
tual rights associated with this Device belong to Allterco Ro-
botics EOOD.
