SER 8588
Alemite, LLC
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
Copyright
©
2006 by Alemite, LLC
This document contains confidential information that is the property of Alemite, LLC
670859
and is not to be copied, used, or disclosed to others without express written permission.
Revision (4-06)
Figure 1
Portable Oil Extractor Model 8588
Portable Oil Extractor
Service Guide
8588
Suction Wands
Dia. x Length
Material
Dia. x Length
Material
inches
mm
inches
mm
0.2 x 27.5
5 x 700
Metal
0.24 x 27.5
6 x 700
Metal
0.2 x 27.5
5 x 700
Plastic
0.28 x 39.4
7 x 1000
Plastic
0.24 x 27.5
6 x 700
Plastic
0.32 x 27.5
8 x 700
Plastic
Maximum Air Pressure
for Emptying
Air Pressure
for Vacuum
Pressure Relief Valve
Tank
Suction Rate *
Size
Usable Capacity
gal/min
liters/min
psi
bar
psi
bar
psi
bar
gal
liters
gal
liters
7
0.5
100
7
14
1
24
90
16
61
1.5
0.4
* Waste oil temperature at a minimum of 158°
F (70° C) with 0.24-inch (6 mm) diameter wand
Table 1
Portable Oil Extractor Model 8588 Specifications
Description
WARNING
1. Do not extract flammable or caustic fluids.
2. Do not exceed 7 psi (0.5 bar) air pressure
when emptying this extractor.
3. Check each component regularly and replace
if worn or damaged.
4. Make sure all connections are secure.
5. Never modify or alter any component of this
dispenser.
6. Relieve pressure or vacuum before inspecting
or servicing.
Model 8588 is a portable extractor designed to:
• safely capture the oil from engine crankcases with
the use of vacuum
• be emptied with the use of air pressure
The extractor consists of:
• 24-gallon (90 liter) tank with twin casters, handle,
level gauge, and tool tray
• six suction wands (See Figure 1)
• a 79-inch (2 m) suction hose
• a 79-inch (2 m) drain hose
• a vacuum gauge, muffler, and pressure-relief
valve
