![background image](http://html1.mh-extra.com/html/airaid/450-331/450-331_installation-instructions_2875936001.webp)
Installation Instructions
For Part Number:
450-331
2015-17 Ford Mustang
3.7L V6
2.
Disconnect the 2 breather lines from the intake tube,
loosen the hose clamps and remove the factory intake .
3.
Remove the 6mm airbox mounting bolt in the inner
fender and lift the entire airbox assembly out of the vehi-
cle. Set the bolt aside for now. It will be reused.
4.
Be sure to retain the speed clip in the inner fender, but
remove the grommet if it does not come out with the air
box .
5.
Install the Grommets and Aluminum Fittings into the
Airaid Intake Tube. Apply the Airaid Bubble Decal
onto the Intake Tube as shown.
6.
Remove the protective film from the Panels and create
the assembly as shown using 4 1/4 -20 Button Head
Screws and Lock washers.
7.
Install the Filter Adapter onto the Panel Assembly as
shown, using the three 1/4-20 Button Head Screws and
Flat Washers.
Component Identification
1
Airaid Track Day Filter
1
2
Airaid Intake Tube
1
3
Top Panel
1
4
Bottom Panel
1
5
Hump Hose Reducer
1
6
Hump Hose
1
7
Filter Adapter
1
8
Weatherstrip 23"
1
9
1/4" Flat Washer
3
10
1/4‐20 X 1/2" Button Head Cap Screw
3
11
¼"‐20 x ¼" Button Head Screw
4
12
#48 Hose Clamp
1
13
#64 Hose Clamp
1
14
#68 Hose Clamp
2
15
1/2" ID Grommet
1
16
3/8 Aluminum Fitting
1
17
5/8 Aluminum Fitting
1
18
13/16" ID Grommet
1
19
¼" Lock Washer
4
20
Airaid Decal
1
1.
Remove the battery box cover in the cowl and discon-
nect the negative battery terminal.
Full color instructions can be viewed on our web site at Airaid.com. If you need any assistance please call 1-800-858-3333 to speak with a repre-
sentative in our Customer Service Center before returning the product.
Grommet
Clip
8.
Transfer the OEM air box grommet and anti-crush
sleeve into the Panel assembly as shown.
9.
R
e
move the drivers side fan shroud bolt and set it
aside.