background image

CAUTION:

Weight on this product should not exceed 350 lbs.

Owner's Manual

Product May Vary Slightly From Pictured.

Exercise can present a 

health risk. Consult a 

physician before beginning 

any exercise program with 

this equipment. If you feel 

faint or dizzy, immediately 

discontinue use of this 

equipment. Serious bodily 

injury can occur if this 

equipment is not assembled 

and used correctly. Serious 

bodily injury can also occur 

if all instructions are not 

followed. Keep others and 

pets away from equipment 

when in use. Always make 

sure all bolts and nuts are 

securely tightened prior to 

each use. Follow all safety 

instructions in this manual.

!

  WARNING

STAMINA PRODUCTS

MADE IN CHINA

© 2019 Stamina Products, Inc.

2019, 02

United States and/or

International patents apply

and/or are pending. See

www.staminaproducts.com

for details.

When calling for parts or 

service, please specify 

the following numbers

 

:

Model#: 55-5102A

S/N: _____________

This Product is Distributed Exclusively by

2040 N Alliance Ave, Springfield, MO 65803

Customer Care

1 (800) 375-7520

www.staminaproducts.com

Summary of Contents for 55-5102A



























Reviews: