![background image](http://html.mh-extra.com/html/aerohive-networks/ap650/ap650_hardware-users-manual_2862655001.webp)
AP650 and AP650X Hardware User Guide
The AP650 and AP650X are high-performance dual-5G and dual band access points.
Both are designed for indoor high-density environments that require HD video streaming and large file transfers. The AP650X has external antennas
(sold separately), and an extended temperature range for industrial environments. These devices support IEEE 802.11ax Orthogonal Frequency-Divi-
sion Multiple Access (OFDMA) multi-user access.
Both access point have a Bluetooth BLE i-beacon for location based services.
For regulatory and compliance information, see
"Regulatory Compliance Statements"
.
Important! Change the Country Code
If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the AP will be
deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:
The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC reg-
ulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.
1. Power on the AP and allow it to find and connect to HiveManager. Once the AP is connected it appears in the table of devices on the
>
Devices
page.
2. Select the check box next to the AP, and then choose
Assign Country Code
from the
Actions
drop-down list. In the dialog box that
appears, select the appropriate country from the drop-down list, and then click
Save
.
3. Upload your changes to the device.
Safety Guidelines
Safety Guidelines
The safety information in this section applies to AP650 and AP650X devices.
The following safety icons are used in these guidelines to identify the type of precaution:
AP650 and AP650X Hardware User Guide
Page 1