Front Panel Menus:
Use Mode Button to move through top layer menus.
Use arrows for navigation in submenus.
Use select to enter into edit mode and enter to save selection.
Units ship with the front panel
logged in by default. If you become
logged out and are prompted for a
password, use the following key
sequence for access.
Press <Select> when panel displays
‘User Login -- logged out’
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
Digital Media Player
Power
Power is OFF
Power is ON
Alarm
No System Alarm
Minor Alarm
Major Alarm
Video
No Video Present on Output
Video Present on Output
Multicast
Not Recieving Multicast
Recieving Multicast
Ethernet
No Network Traffic
Network Traffic Present
System
Decoder
Login
Duration
Network
Time
NTP
Alarm
Mirror
COM2
Firmware
Status
Target
Video
Audio
Multicast
Hue
Brightness Contrast Saturation
Track
Volume SPDIF
Mode
IP Port
Getting Started
Thank you for your purchase of the Adtec edje 4111. This quick
start guide should help you with your initial setup. Advanced users can
find direct API command help as part of the on-board web application.
You can view it by looking for the HELP tab once your unit is powered
up and you are connected to the web-application. See back for more
details.
Additional support can be provided through our Customer Support Department.
Telephone:
615.256.6619
Email:
Internet:
www.adtecinc.com/supportrequest/
The most recent firmware is available on our support website www.adtecinc.com.
System LED Status
R
4111
Quick Start Guide
