–
1.
Disconnect the negative terminal on the battery. With the vehicle on level ground and the
emergency brake set.
2.
You will need the following tools:
a.
13MM Socket
b.
¾” Socket and Wrench
c.
15MM socket and ratchet
3.
Hardware Included:
a.
6 – ½” x 1” Bolts
b.
6 – ½” Nyloc Nuts
c.
12 – Washers
1.
Remove factory Rear Bumper using a 15mm socket and ratchet.
2.
If you purchased lights for the bumper, now is a good time to install them.
3.
With the help of another person place your new bumper onto rear section of frame.
