© Copyright 2008 Adaptive Micro Systems LLC. All rights reserved.
Adaptive Micro Systems • 7840 North 86th Street • Milwaukee, WI 53224 USA • 414-357-2020 • 414-357-2029 (fax) • http://www.adaptivedisplays.com
Adaptive is a registered trademark of Adaptive Micro Systems. MEDIAMaster is a trademark of Adaptive Micro Systems.
All other brand and product names are trademarks or registered trademarks of their respective companies.
M
AY
21, 2008
PN 1109610110
REV
. A
Replacing the Billboard UPS
(PN 1109502801SP)
The billboard UPS (Uninterruptible Power Supply) is a 1500VA (Volt Amp) rack mounted
intelligent UPS that prevents data loss, downtime, and equipment damage due to power
outages, voltage fluctuations, and transient surges. The UPS resides inside the deluxe
remote control cabinet and provides back up power for a limited time to all the components
plugged into it.
The UPS software and SNMP / Web card allows billboard operators to remotely monitor
control cabinet equipment plugged into the UPS. Power can be cycled on and off on two sets
of UPS receptacles (load 1 and 2) allowing for a remote reboot of critical components.
Another feature of the UPS is the capability to view the control cabinet’s ambient
temperature / humidity logs.
Figure 1: Front view of billboard UPS.
Before you begin
Kit contents
Tools / Safety equipment needed
Full body safety harness with lanyard
#2 Phillips screwdriver
Part Number
Qty
Description
1109502801
1
1500VA rack mounted UPS.
11099001
1
SNMP / Web card (factory installed).
Mounting brackets
2
Mounting brackets and screws used to mount the UPS in the cabinet.
1109610110
1
Instructions
