background image

 

As distributor of batteries, we have the following obligations under §18 BattG:

 

1. Batteries can be returned free of charge after use in the commercial firm. 
2. End users are legally obliged to return used batteries. 
3. Manufacturers of batteries are required to mark batteries 

with the following 

symbol before placing them on the market for the first time:  

The manufacturer of 

batteries shall label batteries containing more than 

0.0005% by mass of 

mercury, more than 0.002% by mass of cadmium or more than 0.004% by mass of lead, 
before placing them on the market for the first time with the chemical symbols of metals (Hg, 
Cd, Pb) in which the limit is exceeded. The characters are to be applied below the symbol. 

 
Safety Note: The enclosed batteries must not be charged!

 

Hereby Active Key GmbH & Co. KG declares that the aforementioned type of radio equipment 
with the product models CK103A-RF (2.4G Wireless Keyboard) and GD-001 (Wireless 
Keyboard Dongle) complies with the RED 2014/53 / EU directive. The full text of the EU 

declaration of conformity is available at the following internet address

:

 

http://www.activekey.de/ce-doc/CE_DOC_RED_AK-C7000F-F.pdf

 

Specification 

Delivery Content

 

 

Active Key GmbH & Co. KG 

Brunnenäcker 6 

D-91257 Pegnitz 

www.activekey.de

 

Phone: +49(0)9241/48337-0 

FAX: +49(0)9241/48337-29 

E-Mail

[email protected]

 

 

Instructions 

Safety Information 

Wireless 2,4 GHz RF Keyboard 

AK-C7000F-F 

 

The AK-C7000F-F is a high quality, highly reliable hygiene keyboard with numpad. 
Particularly designed for the use at hospitals and in practitioners. The keyboard is 
sealed by a silicone membrane.

 

Installation 

 

1. Insert the 4 batteries as shown on the bottom of the keyboard. 
2. Plug the wireless receiver (dongle) into a USB port on the computer. 
3. If the keyboard does not yet have a function, please activate the "Connect function" of the      
keyboard by pressing "Fn" + "Esc" (now the "Scroll Lock LED" flashes). Wait about 5 
seconds (until the LED stops flashing). 
4. Now the keyboard should be connected and ready. If this is not the case, please carry out 
the commissioning again from point 1. If there is no function, please contact us. 
Please hold these information ready when you contact us: 

Article and serial number of the product 

Name and producer of your PC/notebook or motherboard 

Operating system and if installed version of the service pack 
 

When the batteries are discharged, the status LEDs light up by each keypress. Please 
replace the batteries as soon as possible. 
 
Note: The Micro-USB interface is only to be used for the implementation of firmware 
updates! 

 

Function of Fn key:

 

Key combination 

effect 

LED status 

Fn + Clean on/off 

Activates/deactivates the key field.  
This function is used for cleaning the 
keyboard, without unplugging it from 
the PC. 

All LEDs are 
flashing 

Fn 

Shows LED status of Num Lock, Caps 
Lock, Scroll Lock 

On 

Fn + Esc 

Activates connect-function (look above 
by installation) 

Scroll Lock LED 
flashes 

 

All rights reserved. Copy or duplication, except for personal use, not permissible without specific prior written consent by Active Key GmbH 

& Co. KG. Contents are subject to change without notice. Errors excepted. Copyright by Active Key GmbH & Co. KG. 

Version 20200922 

 

 

Possible errors 

Repair 

Batteries are empty 

Use new batteries 

Connection between keyboard and 
computer does not work 

Repeat installation procedure 

Operating system or hardware does not 
support a USB keyboard 

To check if your system supports the 
keyboard you can plug a standard wired 
USB keyboard into the USB port. If the 
wired USB keyboard does not work, the 
usage of the keyboard is not possible. 

Compatibility 

All OS that support Standard USB Keyboards 

Temperature Range 

Storage -20° to +60°C   -   Operation 0° to +50°C 

Chemical Resistance 

Wipe Disinfection according to Guidelines Cleaning and 

Disinfection DGHM/VAH 

Interface 

USB 1.1 (1.2 Mbit/s) 

Supply Voltage 

6 V by 4x AAA Batteries 

Current Consumption 

Typ. 5 mA (USB: Low Power Device) 

Connector 

USB Type A (Nano Dongle), Range 10m 

Dimensions (incl. Membrane) 

Approx. 374x139x25mm 

Weight 

0,73kg (without packaging) 

LED Status Indicators 

Num Lock, Caps Lock, Scroll Lock 

Key Switch Technology 

Scissors Balancing Key Guidance 

Key Travel 

Approx. 2 +/- 0,5 mm 

Key Actuation Force 

Approx. 60 grams 

Frequency-band 

2400 MHz 

– 2483,5 MHz 

Maximum transmission power 

10 mW 

Agency Approvals 

CE, RoHS, 

Certification

 FCC, 

EN 60601-1-2:2015*

 

*No Medical Device acc.to Regulation (EU) 2017/745 

- 2,4 GHz wireless keyboard - 4 AAA batteries - 2,4 GHz USB-receiver - Instructions 

Reviews: