![background image](http://html.mh-extra.com/html/actiontec/actiontec-usb-ethernet-dsl-modem-with-routing-capabilities-gt701c/actiontec-usb-ethernet-dsl-modem-with-routing-capabilities-gt701c_specification-sheet_2843171001.webp)
Creative Solutions for the Digital Life
™
T
he new Actiontec USB/Ethernet DSL Modem with
Routing Capabilities is really two devices rolled into
one. It’s a full rate ADSL2/2+ modem. And it’s a router,
capable of networking up to two computers, via wired ports,
and even more using a switch or hub, with a minimum
amount of hassle. So, get rid of the clutter of components on
your desk and replace them all with the Actiontec
USB/Ethernet DSL Modem with Routing Capabilities.
ADSL2/2+
ADSL2/2+ is the DSL standard that enhances modem
performance by tripling the available bandwidth (from 8 Mbps
to 24 Mbps). Say goodbye to stuttering, pixilated video
streams and the endless wait while downloading large files.
There’s more room for voice data, as well, so you can experience
free or low-cost Internet telephone conversations.
Leading Chipset Architecture
The DSL Modem includes TI’s TNETD7200 Broadband
Communication Processor and Peripherals. The TNETD7200
is the industry’s most densely integrated system-on-a-chip
ever offered to the ADSL CPE market by Texas Instruments.
The TNETD7200 is considered an ADSL bridge/router solution,
integrating a broadband communications processor and
peripherals, ADSL physical layer, ADSL line driver, USB physical
layer, and Ethernet physical layer.
Features
•
Supports UPnP Plug-and-Play installation for systems with
Windows Operating Systems (98, 98SE, Me, 2000 and XP)
•
Support One ADSL2+ WAN port (RJ11)
•
Compliant with full-rate ANSI T1.413 Issue 2, ITU G.992.1
(G.dmt) and G.992.2(G.lite) standard
•
Auto-handshake for different ADSL flavors
•
Compliant with USB 1.1 device specification
•
Supports 12-Mbits/s USB data rate (Full Speed)
•
Bridged Ethernet over ATM, PPP over ATM, PPP over
Ethernet
•
Precise ATM traffic shaping
•
IP packet routing and transparent bridge
•
Routing protocol supports RIP-1, RIP-2, Static Routing
•
Build-in NAT, DHCP server
•
DNS relay support
•
PAP/CHAP authentication, administrative passwords
through Telnet
•
Compliant with IEEE 802.3 Ethernet standard
•
Supports One 10/100 Base-T Ethernet LAN port
•
Flow control support for Fast Ethernet
•
Web-based configuration setup
•
Default configuration backup restore
•
FTP firmware upgradeable
•
Support web download
Model # GT701C