ATV/Motorcycle Computer
ACE-4XXX-XX User Manual
10R-029702
PANEL DESCRIPTIONS
1. Tachometer Scale
2. Needle Tachometer
3. 1
st
row: Current &
Max.Speedometer
4. 2
nd
5. Temperature 1 &2
8. RPM Warning Indicator
9. 12/24 Hour Clock
10. Bar Fuel gauge
11. LED indicators
12. Gear indicators
FUNCTIONS
RPM: Digital Tachometer
1. It displays digital tachometer up to 19,900RPM.
Coil Signal.
Shift Warning RPM
MAX RPM: Maximum Tachometer
Km/H or MPH: Speedometer
1. Displays speed meter up to 399.9 Km/H or 248.5 MPH.
3. The speed can be less than 399.9 KM/H in case the setup is using
wheel circumference at 1277mm.
MAX: Maximum Speed Meter
AVG: Average Speed Meter
It calculates average speed from last RESET. The AVG is calculated
from TRIP be divided by RT.
TRIP 1&2: Trip Meter 1&2
as bike/vehicle is moving.
ODO: Odometer
1. ODO accumulates total distance traveled.
that it stored in memory and cannot be reset.
RT: Riding Timer
TT: Total Riding Timer
2. TT data is stored in memory, and couldn’t be reset.
: 12/24 hour Clock
FEATURES
Aluminum CNC main unit built-in 4-6 LED indicators for different
Displays needle tachometer, speedometer, clock, Coolant or air
Digital tachometer is up to 19,900rpm regardless of the needle
tachometer scale
Allows end user to adjust his/her prefer backlight color.
speed sensors.
Allows end user to adjust odometer when the odometer is less
than 30km / 18.6 miles
meter input resistance, as well as “fuel gauge off” mode.
Includes bracket, RPM sensing wire, speed sensor, thermo sensor,
1
2
7
6
8
9
10
11
3
5
4
12
sensor
sensor
MAX 8mm
MAX 8mm
Specific Hall sensors:
The sensor such as Honda CRF, XR….etc. can replace original sensor cable
Hall Effective Speed Sensor and Magnet:
holder.
and the sensor can be aligned to the magnet.
3. Align the center of the magnet to center of side face of the sensor.
4. Make sure the gap between the magnet and the sensor is within 5mm.
Coil
CDI
RPM Input ,
Either one
2-5 Tuns
INSTALLATION & PARTS
RPM sensor mounting:
3. The RPM circuit is designed for most bikes, however some bikes’
signal is too strong if the RPM looks like much more than actual
RPM and unstable, please serial connect the included 1M Ohm
resistor in series to solve it.
Speed Sensor:
ACEWELL has several speed sensors; the unit may include one of them.
If the model is intended to be connected to a gearbox electronic speed
output to obtain the speed reading, no speed sensor will be included.
Reed Speed Sensor and Magnet:
2. Align the center of the magnet to either of the sensor marking lines
or the side of the sensor. The magnet must not travel down the
body of the sensor
4. Make sure the gap between the magnet and the sensor is within 8mm.
Main Unit Installation:
Rubber
Washer
Fixing Screw Nut
Bolt
Main Unit Mounting
BUTTON OPERATIONS
MODE Button
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
LAP: Lap Timer
Fuel Bar & Resistor Value
Bars
-510
-250
-100
510r
250r
100r
7
6
5
4
3
2
1
0-Flash
0-10
11-20
21-35
36-45
46-60
61-75
76-90
91-100
0-25
26-50
51-85
86-110
111-150
151-200
201-230
231-250
0-50
51-100
101-180
181-230
231-300
301-380
381-460
461-510
100-90
89-75
74-60
59-45
44-35
34-20
19-10
9-0
250-230
229-200
199-150
149-110
109-85
84-50
49-25
24-0
510-460
459-380
379-300
299-230
229-180
179-100
99-50
49-0
TEMP 1: Engine Temperature Meter
1. It displays -L- C or -L- Fwhen temperature is lower than 50 C or 122 F,
and displays -H- C or –H- F when temperature is over 180 C or 356 F.
2. The LCD screen flashes the digits of temperature when the thermo
sensor detects temperature higher than the maximum preset
temperature.
TEMP 2: Air Temperature
It displays air temperature from -20 C (-4 F ) to+60 C (+140 F).
MAX TEMP 1: Maximum Temperature
Volt: Digital Voltage Gauge
: Fuel Gauge
1. Has 7 bars to indicate how much fuel remains.
2. Built-in 100, 250, 510Ohm, oFF, -100, -250 and -510 Ohm fuel sender
resistance, the fuel bars will disappear when you select “oFF” mode.
3. The full bars are low resistance and empty bar is high resistance for
100, 250 and 510ohm; -100, -250 and -510 ohm are the inverse.
Thermo Sensor and Sensor Tube:
1. The unit includes a water temperature sensor; you have to purchase
a suitable water pipe temperature sensor tube to install the sensor easily.
2. Cut the water pipe, insert the temperature tube into the pipe and
3. Screw the sensor into the tube.
ACE-43XX-XX : 6,000 rpm
ACE-44XX-XX : 9,000 rpm
ACE-45XX-XX : 12,000 rpm
ACE-46XX-XX : 15,000 rpm
English
英文
Thanks for purchasing the ATV/Motorcycle computer; this manual is specifically designed for ACE-4XXX-XX series.
Different series have different needle tachometer scales, each series has different models, each model has different LED indicators.
You may find that the photo has a set of LED indicators different from your computer, the photo is for reference only.
SPECIFICATIONS
Function
Specifications
Simbolo
Needle Tachometer
ACE-43XX-XX 6,000rpm
ACE-44XX-XX 9,000rpm
Total Riding Time
Digital Tachometer
Riding timer
Max. Temperature
Voltage Gauge
V
rpm
12/24 Hour Clock
RT
Bar-Fuel Gauge*
1, 2,…8 gears and off mode
Speedometer
Km/h
/ MPH
Maximum speed
MAX
Average speed
AVG
Coolant temperature
TEMP 1
Air temperature
TEMP 2
MAX
TEMP 1
Trip meter 1&2
TRIP 1&2
Odometer
ODO
LAP
Gear indicators
100-19,900rpm
0-999999H
0-99H59`59``
100Ω, 250Ω, 500Ω options or
1-7 Bar-graphic
8.0-25.0 Volt
AM/PM 0:00`-11H59`/23H59`
2.4-399.9 Km/h (248.5 MPH)
2.4-399.9 Km/h (248.5 MPH)
2.4-399.9 Km/h (248.5 MPH)
+50 C-180 C / 122 C-356 C
<50 C display -L-, >180 C display -H
-20 C-+60 C / -4 F-140 F
+50 C-180 C / 122 F-356 F
<50 C display -L-, >180 C display -H-
0.0-999.9 KM /624.9Miles
0.0 - 999999 KM, 0.0-624999 Miles
50 laps
Lap
TT
ACE-45XX-XX 12,000rpm
ACE-46XX-XX 15,000rpm
Wire Remote Control Switch Installation:
1. Install the switch arm on handlebar.
2. Install the switch box to one of 3 fixing holes and adjust switch box to a
suitable angle.
3. Plug the switch box connector into the main unit matching connector.
Different series with different needle
tachometer scales are as bellows:
Different models have different LED indicators, each indicator symbol means
Main-beam headlamp/Blue
Hazard Warning/ Red
Parking/Green
Engine oil / Red
Neutral Gear /Green
Reverse Gear /Red
Drive Gear /Green
Engine coolant temperature/ Red
P
D
R
N
Rear fog lamp/Amber
Flash Trailer/Green
Engine in out of use/ Red
as below:
: Gear Indicator
1. The gear indicator calculates gear by comparing speed and RPM then
displays gear position.
2. User has to train the gear indicator before use it.
