background image

1

Eng

lis

h

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully. 
1

To clean the LCD monitor screen: 

Turn off the LCD monitor and unplug the power cord.

Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2

Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight 

can severely damage it. 

3

Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the 

display. 

4

Do not remove the cover or attempt to service this unit yourself. An authorized technician should 

perform servicing of any nature. 

5

Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD 

monitor outside this range may result in permanent damage.

6

Immediately unplug your monitor and call an authorized technician if any of the following 

circumstances occur:

Monitor-to-PC signal cable is frayed or damaged. 

Liquid spills onto the LCD monitor or the monitor is exposed to rain. 

The LCD monitor or case is damaged. 

Package contents 

Attaching the monitor to the base 

1

Remove the monitor base from the packaging and place it on a stable and level workspace. 

2

Remove the monitor from the packaging. 

3

Align the release button at the buttom of the monitor with the corresponding slot at the bottom of 

the base. A clicking sound signifies that the monitor has been securely attached to the base.

Connecting your monitor to a computer  

1

Turn off your computer and unplug your computer's power 

cord. 

2

Connect the signal cable to the VGA and/or DVI-D (optional) 

input socket of the monitor, and the VGA and/or DVI-D 

(optional) output socket of the graphics card on the 

computer. Then tighten the thumbscrews on the signal cable 

connector.

3

Optional: Connect the audio input socket (AUDIO IN) of the 

LCD monitor and the line-out port on the computer with the 

audio cable. 

4

Insert the monitor power cable into the power port at the 

back of the monitor. 

5

Plug the power cords of your computer and your monitor into 

a nearby electrical outlet. 

External controls

LCD monitor   Power cord 

Audio cable 

(optional) 

VGA cable

DVI cable  

(only dual-

input 

models)

User’s guide

Quick start 

guide 

Auto

Auto

If the OSD is active, press Auto

 

to exit the OSD. Once the OSD is inactive, press 

Auto and the monitor will automatically optimize the display position, focus, 

and clock of your display. 

</>

Minus / Plus 

If the OSD is active, press the Minus or Plus buttons to toggle between the OSD 

options. If the OSD is inactive, press the Minus or Plus buttons to adjust the 

volume. (Optional)

Menu

OSD functions

Press to view the OSD. Press again to enter a selection in the OSD.

Power button

Turns the monitor on/off. Blue indicates power on. Amber indicates standby/

power saving mode. 

2

1-1

1-1

1-2

1-2

2

DVI              D-Sub

  

 

 

 

Reviews: