Customer Support: 1-800-377-4532
Revised: June 15, 2012 9:04 AM
IZIP Tricruiser
Rear-end Assembly Replacement
Required Tools:
•
8mm box wrench
•
10mm box wrench
•
17mm box wrench
•
5mm Allen wrench
•
Phillips-head screwdriver
•
Needle-nose pliers
•
Scissors or diagonal cutters
Preparation:
Quick reference:
1.
Remove the basket and fenders.
2.
Remove the battery.
3.
Break the front-rear transfer chain master link and remove the chain.
4.
Open the controller compartment and disconnect the motor. Cut any cable ties holding the motor wire to the
frame.
5.
Remove the seatpost, then flip the tricycle upside-down.
Step 1
a) Remove the basket from
the rear of the trike, using
an 10mm box wrench and
a Phillips-head screwdriver.
b) Remove the fenders
from the trike, using an
8mm box wrench and a
Phillips-head screwdriver.
1
2
1
2
3 4
