background image

abramtek E3

<

Settings

Bluetooth

AVAILABLE DEVICES

How to use single earbud

Support switch between left and right earbuds. You may listen 
to music with single left earbud or right earbud,  with no need 
to repeat the pairing process. 

How to recharge the earbuds

Put the earbuds into the charging compartment and make 
sure it fits the charging port contact receiver properly. When 
the earbuds are fully charged, the white indicator will turn off.

How to recharge the battery case

Insert USB-C cable to recharge the battery case. When the 
battery case is being charged, the white indicator turns on. 
When the battery case is fully charged, 4 white indicators light 
up. 

WARRANTY AND SUPPORT

Limited Warranty
1. If this product or any part thereof is proven to be defective 
by reason of faulty workmanship or defects in materials within 
12 months of purchase, we will at our option repair or replace 
the product free of charge, on condition that the original 
invoice or sales receipt with the date of purchase, or stamp 
from the dealer is presented together with the defective unit.
2. The warranty does not cover product failures which have 
been caused by use of accessories or other peripheral devices 
that are not original Abramtek branded accessories intended 
for use with the product.
3. The warranty does not cover product failures caused by 
modifications, repairs and disassembly by any person who is 
not authorized by the manufacturer.
4. Any defective unit or part shall become property of the 
manufacturer. The warranty does not cover any damage 
caused by misuse, drop, hit or neglect. Abramtek Ltd. 2019, All 
rights reserved. 

ShenZhen Abramtek Technology Co., Ltd.

Add: 5th Floor, Building 1, Yonghongfeng Industrial Park,
Baiyunshan Village, Dalang Street, Longhua Town,
Shenzhen, China 518109
Website: www.abramtek.com
Email: [email protected]

How to pair earbuds with your phone

Take out the earbuds from charging case, the earbuds will 
power on and pair to each other automatically. Then the left 
earbud indicator turns off and the earbuds enter into pairing 
mode. Activate your phone's BT and search for "abramtek E3" 
and select. After initial setup, the earbuds will automatically 
reconnect to the last paired device. 

Note: If the earbuds do not work properly, please put the 
earbuds into charging case for 2-3 seconds and then try again.

Notes: 
1.If the earbuds cannot hold a charge, please insert USB-C 
    cable to charge the charging case. 
2.Please put the earbuds into charging case if not used. 
    Otherwise, the earbuds always stay on. 

USB-C Charging Port

Left Earbud

Right Earbud

Charging Case Battery Indicator

White LED Light

Power ON 

Take out the earbuds from charging case, the earbuds will 
power on automatically (White indicator flash 3 times, and 
then orange indicator light once). 

Power OFF

Put the earbuds into the charging case, the earbuds will power 
off automatically (Orange indicator always on) 

Function Points 

Take Out Earbuds

Reject Phone Calls

When a phone call comes in, tap the right earbud 3 times (time 
interval 0.6s) to reject the call. 

Play/Pause 

When playing music, tap the right earbud twice (time interval 0.6s) 
to pause and play the music. 

Previous Track/Next Track

When playing music, tap the left earbud 3 times (time interval 0.6s) 
to switch to the previous track, tap the right earbud 3 times to 
switch to the next track. 

Voice Interaction 

In standby mode, tap the left earbud twice (time interval 0.6s) to 
activate your phone's voice assistant (for example, Siri). 

Product Parameters 

Model:  E3 
Bluetooth Version: 5.0 
Bluetooth Distance: 10 meters in open area 
Charging Time: 3 hours 
Standby Time: 150 hours 
Playback Time: Over 6 hours 
Battery: Polymer li-ion battery 
Support Protocol: HFP/HSP/A2DP/AVRCP 
Earbuds Battery Capacity: 3.7V

60mAh 

Charging Case Battery Capacity: 3.7V       1200mAh 
Charging Case Input: 5V       800mA 
(All technological information is subject to practical performance) 

       

Tap Area 

Orange Light: Charging 
White Light: In-Use/Connected 

Indicator 

Optional Eartips

To improve wearing experience, 
please select the best fit eartips to use.

It is recommended to try Medium eartips as it's suitable for 
most people. The factory assembled earbuds are equipped 
with Medium eartips. 

IMPORTANT: Please use the best fit eartips. The better the air 
tightness, the better the sound insulation and sound quality.

FAQs 

What measures should be taken if signals are unstable? 
1. Restart the earbuds

2. Check the compatibility and call quality of your phone

 

3. Check if the earbuds are too far away from your phone or 
    there is any interference around

4. Do not stay at the surroundings where signal reflection 
    exists

What should I do if too much noise from the earbuds? 
1. Check the noise control of your phone

2. Check if the earbuds are too far away from your phone

3. Check if there is any electromagnetic radiation around

What should I do if I cannot hear the voice from earbuds? 
1. Check if the earbuds are muted

2. Check if the earbuds are connected to your phone

3. Check if the earbuds are too far away away from your phone 

    

or there is any interference around

.  

ABRAMTEK E3

True Wireless Earbuds

User Manual

 -

M

S

Answer Phone Calls 

When a phone call comes in, tap the right earbud twice (time 
interval 0.6s) and this will answer the call. After you finish your 
conversation, tap the right earbuds twice to hang up phone.

FCC ID:2AGCAE3
Model Name:E3

Summary of Contents for E3









Reviews: